Cameras

Insta360 camera perfect companion, automatically concealed in photos and videos by advanced algorithms. Can be used with Bullet-Time Handle to shoot Bullet-Time. PRODUCT SPECIFICATIONS Retracted length: 233mm (9.2in)Extended length: 1141mm (44.9in)Weight: 118g (4.1607)Material: Aluminum alloy  

Read more less

The Insta360 One X Dive Case is great for scuba diving and other underwater uses, the case is waterproof up to 30 meters that allow you to take 360-degree videos while underwater. Product Description Great for scuba diving and other underwater uses, the case is waterproof up to 30 meters.   HIGHLIGHTS: Purpose-build dome lensesWaterproof up to 30 metres *Bottom obstruction coverable by a logo in the app or by reframing your shot.    COMPATIBILITY: Insta360 ONE X

Read more less

The Insta360 All-purpose Tripod is seriously stable with extendable legs to adapt to different terrain. Specifically designed for ONE X, EVO, and ONE. Product Description The Insta360 All-purpose Tripod is seriously stable with extendable legs to adapt to different terrain. Specifically designed for ONE X, EVO, and ONE.   Note: 1. Take care when placing the tripod. It's safest to use at the lowest height and on a flat surface to prevent the device on the tripod from tipping over. 2.  If the Tripod is used with an extension rod, do not extend over 1.5 meters or exceed the maximum load limit of the extension rod. Please refer to the extension rod's product specifications. 3. Please do no use with the legs partially extended 4. Please remove the camera from the Tripod when changing the position of the Tripod. Strong shaking may cause damage of the screw (especially with an extension rod attached) in the mounting plate and / or the camera.   COMPATIBILITY: Insta360 ONE XInsta360 ONEInsta360 EVO

Read more less

Bluetooth® wireless connectivity with easy audio pairing 10 + hours of play time with a fully charged battery Ergonomic design for a comfortable, strain-free fit Microphone and 3-button controls on tangle-free braided cables Three sets of ear gels and a stash bag for when you’re on the move Product Description The Uplift 2 Wireless is the newest model of Bluetooth® enabled earbuds from the House of Marley. This in-ear design incorporates Bluetooth® connectivity, utilize an easy pairing system and offers over 10 hours of play time on a full battery. The Uplift 2 Wireless is ergonomically designed for a comfortable and natural fit. It is constructed using the sustainable materials of FSC® Certified Wood, durable recyclable aluminum and medical grade silicone.

Read more less

Solid Bamboo-crafted Plinth Bluetooth® v4.2 capability Replaceable AT3600L cartridge USB to PC recording Auto start/stop belt drive Built in Pre-Amp 3.5mm Aux Out RCA (Phono/Line) 45 and 33 RPM speeds Product Description The Stir It Up Wireless turntable provides a sleek design using solid bamboo, REGRIND™ silicone, REWIND™ fabric, recycled plastic, and recyclable aluminum. Enjoy a classic sound system that wirelessly connects to any Bluetooth® speaker and offers a built-in switch pre-amp allowing seamless compatibility with your Marley speakers or in-home receivers. The Stir It Up Wireless includes a USB port for PC recording, a RCA output, and a 3.5mm headphone jack.

Read more less

Meet the Forestry Pro II Laser Rangefinder – measuring faster and further. This upgrade now has a distance measurement range of 7.5-1,600 m. Three-point measurement accurately assesses height even if the base and/or top of your subject is obscured. HYPER-READ gives rapid and stable measurement, with results shown on the internal display in approx 0.3 seconds. Target Priority Switch System lets you choose between closest or furthest subjects, and up to 250 measurements can be stored in the log. A larger backlit external display offers clear viewing in low light, and the compact body is waterproof and comfortable to carry. Put precision in your pocket with the Forestry Pro II.   Product Description Product DescriptionMeet the Forestry Pro II Laser Rangefinder – measuring faster and further. This upgrade now has a distance measurement range of 7.5-1,600 m. Three-point measurement accurately assesses height even if the base and/or top of your subject is obscured. HYPER-READ gives rapid and stable measurement, with results shown on the internal display in approx 0.3 seconds. Target Priority Switch System lets you choose between closest or furthest subjects, and up to 250 measurements can be stored in the log. A larger backlit external display offers clear viewing in low light, and the compact body is waterproof and comfortable to carry. Put precision in your pocket with the Forestry Pro II. Features Faster and more accurate measurement Large external display, backlit for easy viewing Keep a log list as you go Switch target as the touch of a button Portable, comfortable and robust   Product Specifications Specifications Measurement Range Distance: 7.5-1,600 m Angle: ±89º Magnification 6x Objective Diameter 21mm Field of View 7.5º Eye Relief 18.0mm Exit pupil 3.5mm Dimensions 110 x 74 x 42 mm Weight 170 g   In The Box 1 x Forestry Pro  

Read more less

  The Insta360 One R Fast Charging Hub can charge two batteries at once   COMPATIBILITY: Insta360 ONE R Battery Base and Boosted Battery Base

Read more less

Unmatched Optics: Each of Freewell 4K Series optics are handcrafted precisely compatible to be used with Insta360 One R (360 Edition) Coating: Waterproof, Dustproof, Scrathproof, Oilproof, Color Neutral coating makes sure you get the best possible image while shooting outdoor. Storage Protection: Each filter kits comes with a robust magnetic filter case Availability: In Stock

Read more less

Designed for ONE X2 batteries. Charge 3 batteries simultaneously.   Product Description   Product Specifications PRODUCT SPECIFICATIONS Material: PCWeight: 85.3gDimensions: 74*60.3*30mmPower Input: 9V / 2A  5V / 2ACharging: Type CCompatibility: Insta360 X2 Battery  

Read more less

Product Description

Read more less

• Extremely light in weight so no effect on gimbal • Made to be used with DJI Osmo Pocket,Pocket 2   Product Description DJI OSMO POCKET, POCKET 2 FILTER – CPL • High-end double side multicoated optical glass for premium image & video quality • Include CPL • Made to be used with DJI Osmo Pocket, Pocket 2 How it helps The CPL (Circular Polarized Lens) filter from Freewell Gear is designed to eliminate the unwanted glare from naturally reflective surfaces commonly seen outdoors, such as glass window panes, snow, and water bodies. Together, these filters help to capture the clearest and sharpest image, with a natural blurry motion to moving objects in your footage. Specifications The CPL filter from Freewell Gear for DJI Osmo Pocket,Pocket 2 is excellent in preventing unwanted glare from reflective surfaces, such as water bodies, snow, or even glass windows when flying outdoors. DJI OSMO POCKET, POCKET 2 FILTER – ND4 • High-end double side multicoated optical glass for premium image & video quality • Include ND4 cuts light by 2 f-stops Suitable for Cloudy Day's • Made to be used with DJI Osmo Pocket, Pocket 2 How it helps The ND4 Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND4 filter is ideal for getting clear and accurate images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND4 filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The ND4 filter for DJI Osmo Pocket, Pocket 2 from Freewell Gear helps to slow down the shutter speed by 2 f-stops. This is excellent for capturing crystal-clear photographs when the weather is overcast or fairly cloudy, with lower daylight. DJI OSMO POCKET, POCKET 2 FILTER – ND8 • High-end double side multicoated optical glass for premium image & video quality • Include ND8 cuts light by 3 f-stops Suitable for partially cloudy days • Made to be used with  DJI Osmo Pocket, Pocket 2 How it Helps The ND8 Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND8 filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND8 filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The Freewell Gear ND8 filter for DJI Osmo Pocket, Pocket 2 is designed to reduce the amount of light hitting the camera sensor, which slows down the camera’s shutter speed by 3 f-stops. This is extremely helpful in capturing realistic and sharp images, especially in cloudy daylight conditions. DJI OSMO POCKET, POCKET 2 FILTER – ND8/PL • High-end double side multicoated optical glass • Include ND8/PL suitable for partially cloudy day's • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND8/PL Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND8/PL filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND8/PL filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The ND8/PL hybrid filter from Freewell Gear is designed to restrict the amount of light entering the camera lens by 3 f-stops. It helps to capture sharp and more precise images even in bright sunny conditions outside. It also helps to prevent unwanted glare from marring the quality of your footage or photograph. DJI OSMO POCKET, POCKET 2 FILTER – ND16 • High-end double side multicoated optical glass for premium image & video quality • Include ND16 cuts light by 4 f-stops suitable for normal sunny days • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND16 Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND16 filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND16 filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The ND16 filter for DJI Osmo Pocket, Pocket 2 from Freewell Gear decreases the amount of light entering the camera lens by 4 f-stops. This helps balance the image correctly and capture sharp footage in normal daylight conditions. Apart from slowing down your shutter speed, the ND filters are also useful in avoiding the unwanted ‘Jell-O’ effect which is often seen in footages captured without ND filters. DJI OSMO POCKET, POCKET 2 FILTER – ND16/PL • High-end double side multicoated optical glass • Include ND16/PL is suitable for normal sunny days.  • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND16/PL Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND16/PL filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND16/PL filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The ND16/PL hybrid filter from Freewell Gear is meant to reduce the amount of light hitting the camera sensor by 4 f-stops. This helps to capture well-balanced and cinematic images in very bright sunlight conditions, especially in the afternoon and early morning. The filter also protects from unwanted reflections of windows or water bodies. DJI OSMO POCKET, POCKET 2 FILTER – ND32 • High-end double side multicoated optical glass for premium image & video quality • Include ND32 cuts light by 5 f-stops suitable for bright sunny days. • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND32 Filter for DJI Osmo Pocket,Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND32 filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND32 filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications Freewell ND32 filter for Osmo Pocket, Pocket 2 – The ND32 filter for DJI Osmo Pocket, Pocket 2 is ideally suited for very bright and sunny daylight conditions. The filter cuts light falling on the sensor by 5 f-stops which is immensely helpful to remove the ‘Jello’ effect seen due to the camera’s rolling shutter and give a natural blur motion to the footage DJI OSMO POCKET, POCKET 2 FILTER – ND32/PL • High-end double side multicoated optical glass • Include ND32/PL is suitable for bright sunny conditions. • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND32/PL Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime condition. The ND32/PL filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND32/PL filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The ND32/PL filter from Freewell Gear is an excellent way to decrease the drone camera’s shutter speed by 5 f-stops, thus slowing down the shutter speed effectively. This helps to capture sharp and vividly colorful images, in the brightest sunlit conditions. With this filter, you can also capture the much-desired ‘motion blur’ effect which gives your footages a genuinely cinematic look, apart from protecting your images against unwanted glare from natural surfaces that reflect light. Neutral Density ND64 Camera Lens Filter Compatible with DJI Osmo Pocket, Pocket 2 • High-end double side multicoated optical glass for premium image & video quality • Include ND64 cuts light by 6 f-stops Suitable for extreme bright condition • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND64 Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND64 filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND64 filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications Freewell ND64 filter for DJI Osmo Pocket, Pocket 2 - The ND64 filter from Freewell is ideally suited for very bright and sunny daylight conditions. The filter cuts light falling on the sensor by 6 f-stops which is immensely helpful to remove the ‘Jello’ effect seen due to the camera’s rolling shutter and give a natural blur motion to the footage. DJI OSMO POCKET, Pocket 2 FILTER – ND64/PL • High-end double side multicoated optical glass • Include ND64/PL suitable for extremely bright sunny conditions • Made to be used with DJI Osmo Pocket, Pocket 2 How it Helps The ND64/PL Filter for DJI Osmo Pocket, Pocket 2 from Freewell is designed for perfect images while shooting in bright daytime conditions. The ND64/PL filter is ideal for getting clear and perfect images when shooting outdoors in bright conditions for long exposure photography. Freewell is the world first to design ND64/PL filters for DJI Drones so that you can capture the best possible long exposure which was made possible even with previous DJI Osmo Pocket, Pocket 2 Specifications The Freewell Gear ND64/PL hybrid filter is useful for slowing down the camera shutter speed to its lowest. This is an excellent way to add the ‘motion blur’ effect which we dreamy. It is also effective in preventing unwanted reflections from windows, snow, water bodies, etc. from spoiling the image quality.

Read more less

Protection for your lenses. Product Description Lens Protector for the lens of ONE X2   IMPORTANT NOTES 1) Before use, make sure lenses are clean and dry.2) Upon removing the Lens Guards, apply new adhesives before placing back on your ONE X2. If needed, replacements can be bought from the Insta360 store.3) The Lens Guards are splash-proof, but are not designed for underwater use. Use the Dive Case for underwater shooting instead.4) To remove the Lens Guards use the provided Prying Tool. Take care not to scratch the lenses as you remove the Lens Guards.   Product Specifications PRODUCT SPECIFICATIONS Main Material: PC-1250YWeight: 1.5gDimensions: 33.5 x 7.66mm   In The Box IN THE BOX Lens Guard x 2Double-sided Adhesives x 6Prying Tool x 1  

Read more less

With every detail, DJI RS 3 delivers a flexible and efficient shooting experience to solo creators and independent crews. Light and sleek, it provides professional stabilization and efficient control for more creative freedom and endless possibilities.   Product Description READY WHEN YOU ARE With every detail, DJI RS 3 delivers a flexible and efficient shooting experience to solo creators and independent crews. Light and sleek, it provides professional stabilization and efficient control for more creative freedom and endless possibilities. DJI RS 3 is ready when you are. GET STARTED RIGHT AWAYIT'S ALL ABOUT SPEED   QUICK-RELEASE PLATES With dual-layered quick-release plates, mounting a camera onto RS 3 is fast and convenient, with no need to re-balance the gimbal after swapping out a new battery or memory card. A newly added fine-tuning knob on the tilt axis allows the camera to slide forward or backward with millimeter-grade precision to achieve accurate balancing more easily when changing lenses.     AUTOMATED AXIS LOCKS RS 3 lets you get up and running instantly. When the gimbal is powered off, press and hold the power button, and the three axes unlock while the gimbal expands automatically, allowing you to start working within seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making transportation and travel significantly more efficient. Press and hold the power button and it will fold and lock automatically.   WIRELESS SHUTTER CONTROL By implementing Dual-Mode Bluetooth, RS 3 supports wireless shutter control, [1] saving time and effort with every use. After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. Previously paired cameras can automatically reconnect after the first use, eliminating the need for a camera control cable.   PROFESSIONAL STABILIZATION   EXCELLENT WEIGHT-TO-PAYLOAD RATIO Weighing only 1.3 kg/2.8 lbs (including gimbal, battery grip, and quick-release plates), RS 3 can be held easily in one hand, while its 3kg/6.6lb load capacity is more than enough to support mainstream cameras, including the Sony A7S3 or Canon R5 with a 24-70mm F2.8 lens.   3RD-GEN RS STABILIZATION ALGORITHM Thanks to a next-generation RS stabilization algorithm, RS 3 provides enhanced stability in any scenario. Laboratory testing shows RS 3 provides a 20% increase in stability over RSC 2, effortlessly managing low-angle shots, running scenarios, or switching between high and low positions.   BEYOND SMOOTH When you need even smoother results, turn on SuperSmooth mode. RS 3 will increase motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or when 100mm-equivalent focal lenses are used.     FAST PARAMETER SETTING   1.8" OLED TOUCHSCREEN Compared with the black and white screen of RSC 2, RS 3 is equipped with a 1.8-inch OLED full-color touchscreen with an 80% larger display. It also supports most Ronin app settings, providing intuitive and precise control together with the redesigned user interface.   INSTANT MODE SWITCHING By simply sliding the new gimbal mode switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started fast.   CUSTOMIZABLE FRONT DIAL Rotating the front dial allows you to control zoom or focus. It can also be customized to control the camera's shutter, aperture, ISO, [2] or gimbal movements, making it exceptionally convenient for single-handed operation.     EFFICIENT VIDEO TRANSMISSION   MONITORING VIA SMARTPHONE RS 3 supports the Ronin Image Transmitter (previously known as the Ronin RavenEye Image Transmitter) [3] to transmit 1080p/30fps HD live feeds directly to a mobile device. The maximum transmission distance is 200 meters [4] and the end-to-end transmission latency is as low as 60 ms. [4] A smartphone can also be attached to the NATO port on RS 3 with the phone holder for wireless monitoring.   INTEGRATED MONITORING AND CONTROL Remotely adjust camera exposure directly in the Ronin app, [2] or control the gimbal with the virtual joystick to get an integrated monitoring and control experience.   FORCE MOBILE With the Ronin Image Transmitter, a smartphone can be used as a motion controller to remotely control the RS 3 gimbal for more flexible and dynamic camera movements.     A BATTERY BUILT FOR PROS   QUICK-RELEASE DESIGN The new RS 3 battery grip features a cartridge design, making it easier to swap batteries and smaller for storage compared with RSC 2. It can even be charged independently from the gimbal.   12-HOUR OPERATING TIME + FAST CHARGING The new battery grip provides an extended runtime of up to 12 hours, [5] enough to handle continuous shooting throughout the day. It supports 18W PD fast charging with a charge time of just 2.5 hours. It can even be used while charging to keep RS 3 powered almost indefinitely.   Product Specifications PERIPHERAL Accessory PortNATO Ports1/4"-20 Mounting HoleCold ShoeVideo Transmission/Focus Motor Port (USB-C)RSS Camera Control Port (USB-C)Focus Motor Port (USB-C) BatteryModel: BHX711-3000-7.2VType: 2SCapacity: 3000 mAhEnergy: 21 WhMax. Runtime: 12 hours[1]Charging Time: Approx. 2.5 hours when using 18W quick charging (supports PD protocol)Suggested Charging Temperature: 5° to 40° C (41° to 104° F) ConnectionsBluetooth 5.0Charging Port (USB-C) Ronin App RequirementsiOS 11.0 or aboveAndroid 7.0 or above Languages Supported by the TouchscreenEnglish, Simplified Chinese, Traditional Chinese, German, French, Korean, Japanese, Spanish, Portuguese (Brazil), Russian, Thai WORKING PERFORMANCE Tested Payload3 kg (6.6 lbs) Maximum Controlled Rotation SpeedPan: 360°/sTilt: 360°/sRoll: 360°/s Mechanical RangePan axis: 360° continuous rotationRoll axis: -95° to +240°Tilt axis: -112° to +214° MECHANICAL & ELECTRICAL PROPERTIES Operating Frequency2.400-2.484 GHz Bluetooth Transmitter Power<8 dBm Operating Temperature-20° to 45° C (-4° to 113° F) WeightGimbal: Approx. 990 g (2.18 lbs)Grip: Approx. 200 g (0.44 lbs)Extended Grip/Tripod (Plastic): Approx. 183 g (0.4 lbs)Upper and Lower Quick-Release Plates: Approx. 107 g (0.23 lbs) DimensionsFolded: 254×230×68 mm (L×W×H, excluding camera, grip, and the Extended Grip/Tripod)Unfolded: 364×187×170 mm (L×W×H, height includes the grip and excludes the Extended Grip/Tripod) DJI RONIN IMAGE TRANSMITTER ConnectionsPower/Communication Port (USB-C)HDMI Port (Mini HDMI)RSS Camera Control Port (USB-C) Expansion PortCold ShoeOperating Frequency2.400-2.484 GHz5.725-5.850 GHz Weight126 g (0.27 lbs) Dimensions82×63×24 mm (L×W×H) Transmitter Power (EIRP)2.400-2.484 GHz:<25 dBm (FCC)<20 dBm (CE/SRRC/MIC)5.725-5.850 GHz:<25 dBm (FCC/SRRC)<14 dBm (CE) BatteryCapacity: 2970 mAhCompatible Charger: 5V/2ACharging Time: Approx. 2.5 hoursMax Battery Life: Approx. 3.5 hours Transmission Range200 m (SRRC/FCC)[2]100 m (CE)[2] Latency60 ms Operating Current/Voltage900 mAh, 3.7V Operating Temperature0° to 45° C (32° to 113° F)   In The Box Gimbal × 1BG21 Grip × 1USB-C Charging Cable (40 cm) × 1Lens-Fastening Support × 1Extended Grip/Tripod (Plastic) × 1Quick-Release Plate (Arca-Swiss/Manfrotto) × 1Multi-Camera Control Cable (USB-C, 30 cm) × 1Screw Kit × 1  

Read more less

With every detail, DJI RS 3 delivers a flexible and efficient shooting experience to solo creators and independent crews. Light and sleek, it provides professional stabilization and efficient control for more creative freedom and endless possibilities.   Product Description READY WHEN YOU ARE With every detail, DJI RS 3 delivers a flexible and efficient shooting experience to solo creators and independent crews. Light and sleek, it provides professional stabilization and efficient control for more creative freedom and endless possibilities. DJI RS 3 is ready when you are. GET STARTED RIGHT AWAYIT'S ALL ABOUT SPEED   QUICK-RELEASE PLATES With dual-layered quick-release plates, mounting a camera onto RS 3 is fast and convenient, with no need to re-balance the gimbal after swapping out a new battery or memory card. A newly added fine-tuning knob on the tilt axis allows the camera to slide forward or backward with millimeter-grade precision to achieve accurate balancing more easily when changing lenses.     AUTOMATED AXIS LOCKS RS 3 lets you get up and running instantly. When the gimbal is powered off, press and hold the power button, and the three axes unlock while the gimbal expands automatically, allowing you to start working within seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making transportation and travel significantly more efficient. Press and hold the power button and it will fold and lock automatically.   WIRELESS SHUTTER CONTROL By implementing Dual-Mode Bluetooth, RS 3 supports wireless shutter control, [1] saving time and effort with every use. After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. Previously paired cameras can automatically reconnect after the first use, eliminating the need for a camera control cable.   PROFESSIONAL STABILIZATION   EXCELLENT WEIGHT-TO-PAYLOAD RATIO Weighing only 1.3 kg/2.8 lbs (including gimbal, battery grip, and quick-release plates), RS 3 can be held easily in one hand, while its 3kg/6.6lb load capacity is more than enough to support mainstream cameras, including the Sony A7S3 or Canon R5 with a 24-70mm F2.8 lens.   3RD-GEN RS STABILIZATION ALGORITHM Thanks to a next-generation RS stabilization algorithm, RS 3 provides enhanced stability in any scenario. Laboratory testing shows RS 3 provides a 20% increase in stability over RSC 2, effortlessly managing low-angle shots, running scenarios, or switching between high and low positions.   BEYOND SMOOTH When you need even smoother results, turn on SuperSmooth mode. RS 3 will increase motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or when 100mm-equivalent focal lenses are used.     FAST PARAMETER SETTING   1.8" OLED TOUCHSCREEN Compared with the black and white screen of RSC 2, RS 3 is equipped with a 1.8-inch OLED full-color touchscreen with an 80% larger display. It also supports most Ronin app settings, providing intuitive and precise control together with the redesigned user interface.   INSTANT MODE SWITCHING By simply sliding the new gimbal mode switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started fast.   CUSTOMIZABLE FRONT DIAL Rotating the front dial allows you to control zoom or focus. It can also be customized to control the camera's shutter, aperture, ISO, [2] or gimbal movements, making it exceptionally convenient for single-handed operation.     EFFICIENT VIDEO TRANSMISSION   MONITORING VIA SMARTPHONE RS 3 supports the Ronin Image Transmitter (previously known as the Ronin RavenEye Image Transmitter) [3] to transmit 1080p/30fps HD live feeds directly to a mobile device. The maximum transmission distance is 200 meters [4] and the end-to-end transmission latency is as low as 60 ms. [4] A smartphone can also be attached to the NATO port on RS 3 with the phone holder for wireless monitoring.   INTEGRATED MONITORING AND CONTROL Remotely adjust camera exposure directly in the Ronin app, [2] or control the gimbal with the virtual joystick to get an integrated monitoring and control experience.   FORCE MOBILE With the Ronin Image Transmitter, a smartphone can be used as a motion controller to remotely control the RS 3 gimbal for more flexible and dynamic camera movements.     A BATTERY BUILT FOR PROS   QUICK-RELEASE DESIGN The new RS 3 battery grip features a cartridge design, making it easier to swap batteries and smaller for storage compared with RSC 2. It can even be charged independently from the gimbal.   12-HOUR OPERATING TIME + FAST CHARGING The new battery grip provides an extended runtime of up to 12 hours, [5] enough to handle continuous shooting throughout the day. It supports 18W PD fast charging with a charge time of just 2.5 hours. It can even be used while charging to keep RS 3 powered almost indefinitely.   Product Specifications PERIPHERAL Accessory PortNATO Ports1/4"-20 Mounting HoleCold ShoeVideo Transmission/Focus Motor Port (USB-C)RSS Camera Control Port (USB-C)Focus Motor Port (USB-C) BatteryModel: BHX711-3000-7.2VType: 2SCapacity: 3000 mAhEnergy: 21 WhMax. Runtime: 12 hours[1]Charging Time: Approx. 2.5 hours when using 18W quick charging (supports PD protocol)Suggested Charging Temperature: 5° to 40° C (41° to 104° F) ConnectionsBluetooth 5.0Charging Port (USB-C) Ronin App RequirementsiOS 11.0 or aboveAndroid 7.0 or above Languages Supported by the TouchscreenEnglish, Simplified Chinese, Traditional Chinese, German, French, Korean, Japanese, Spanish, Portuguese (Brazil), Russian, Thai WORKING PERFORMANCE Tested Payload3 kg (6.6 lbs) Maximum Controlled Rotation SpeedPan: 360°/sTilt: 360°/sRoll: 360°/s Mechanical RangePan axis: 360° continuous rotationRoll axis: -95° to +240°Tilt axis: -112° to +214° MECHANICAL & ELECTRICAL PROPERTIES Operating Frequency2.400-2.484 GHz Bluetooth Transmitter Power<8 dBm Operating Temperature-20° to 45° C (-4° to 113° F) WeightGimbal: Approx. 990 g (2.18 lbs)Grip: Approx. 200 g (0.44 lbs)Extended Grip/Tripod (Plastic): Approx. 183 g (0.4 lbs)Upper and Lower Quick-Release Plates: Approx. 107 g (0.23 lbs) DimensionsFolded: 254×230×68 mm (L×W×H, excluding camera, grip, and the Extended Grip/Tripod)Unfolded: 364×187×170 mm (L×W×H, height includes the grip and excludes the Extended Grip/Tripod) DJI RONIN IMAGE TRANSMITTER ConnectionsPower/Communication Port (USB-C)HDMI Port (Mini HDMI)RSS Camera Control Port (USB-C) Expansion PortCold ShoeOperating Frequency2.400-2.484 GHz5.725-5.850 GHz Weight126 g (0.27 lbs) Dimensions82×63×24 mm (L×W×H) Transmitter Power (EIRP)2.400-2.484 GHz:<25 dBm (FCC)<20 dBm (CE/SRRC/MIC)5.725-5.850 GHz:<25 dBm (FCC/SRRC)<14 dBm (CE) BatteryCapacity: 2970 mAhCompatible Charger: 5V/2ACharging Time: Approx. 2.5 hoursMax Battery Life: Approx. 3.5 hours Transmission Range200 m (SRRC/FCC)[2]100 m (CE)[2] Latency60 ms Operating Current/Voltage900 mAh, 3.7V Operating Temperature0° to 45° C (32° to 113° F)   In The Box Carrying Case  × 1Gimbal  × 1BG21 Grip  × 1USB-C Charging Cable (40 cm)  × 1Briefcase Handle  × 1Lens-Fastening Support  × 1Extended Grip/Tripod (Plastic)  × 1Quick-Release Plate (Arca-Swiss/Manfrotto)  × 1Focus Motor (2022)  × 1Focus Motor Rod Mount Kit  × 1Focus Gear Strip  × 1Multi-Camera Control Cable (USB-C, 30 cm)  × 2Lens-Fastening Strap  × 1Screw Kit  × 1

Read more less

DJI RS 3 Pro is an advanced, comprehensive camera expansion platform that empowers videographers and provides coordinated shooting solutions for professional crews.   Product Description NOTHING OUT OF REACH Expanding on the powerful features of the Ronin series, DJI RS 3 Pro is an advanced, comprehensive camera expansion platform that empowers videographers and provides coordinated shooting solutions for professional crews. With DJI RS 3 Pro, nothing is out of reach. PRO-GRADE DESIGN     HANDLE BIG PAYLOADS  RS 3 Pro uses extended carbon fiber axis arms to allow more balancing space for professional cameras, making it a perfect fit for cameras like the Sony FX6 or Canon C70 with 24-70mm F2.8 lenses, expanding creative possibilities. The new Extended Lower Quick-Release Plate [1] ensures more stable camera mounting, and is convenient for installing a lens support for more secure setups. To make the balancing process easier, a fine-tuning knob has been added for the tilt axis to move the camera forward or backward more precisely, even down to the millimeter. With Teflon®-coated components, RS 3 Pro can be balanced with less friction and lower resistance, even when mounting heavy cameras.   AUTOMATED AXIS LOCKS RS 3 Pro allows you to get started fast to never miss a shot. Simply press and hold the power button and the three axes unlock and expand automatically, allowing you to start shooting within seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making company move significantly more efficient. Press and hold the power button and it will fold and lock automatically.   HIGH-CAPACITY PAYLOADS The optimized structural design of RS 3 Pro ensures that its weight remains the same as RS 2 at just 1.5 kg/3.3 lbs (includes gimbal, battery grip, and dual-layered quick-release plates), while its load capacity is a robust 4.5 kg/10 lbs, delivering powerful support in a lightweight body.   WIRELESS SHUTTER CONTROL Equipped with Dual-Mode Bluetooth technology, RS 3 Pro is able to achieve efficient and reliable wireless shutter control. [2] After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. A previously paired camera will automatically reconnect, saving you time with every ensuing use.   INSTANT MODE SWITCHING By simply sliding the new Gimbal Mode Switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started fast.   BIGGER IS BETTER A large, built-in 1.8-inch OLED full-color touchscreen increases screen size by 28% compared to RS 2, making it incredibly convenient for setting parameters, checking shooting status, and framing your tracked subjects. [3] And with the redesigned user interface, every setting is more intuitive and precise. The OLED screen also offers higher brightness than the LCD screen of RS 2 for better outdoor viewing with lower power consumption.     PRO-GRADE STABILIZATION   SLEEK CARBON FIBER CONSTRUCTION The RS 3 Pro arms are constructed from layered sheets of uncut carbon fiber, just like the Ronin 2. This makes it lighter and stronger than the jointed carbon fiber material used on RS 2, increasing stiffness and lowering weight to cope with even more demanding shooting environments.   THE NEXT EVOLUTION OF RS STABILIZATION  Empowered by the third generation of RS stabilization algorithms, RS 3 Pro provides significantly enhanced stability in any scenario. Laboratory sampling data shows RS 3 Pro provides a 20% increase in stability over RS 2, effortlessly managing low-angle shots, running scenarios, or switching between high and low positions.   GET SUPERSMOOTH RESULTS When SuperSmooth mode is enabled, RS 3 Pro increases motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or when using 100mm-equivalent focal length lenses.       PRO-GRADE FOCUSING   LIDAR ASSISTANCE To make focusing easier, Ronin 4D’s LiDAR focusing technology is applied to RS 3 Pro. The new LiDAR Range Finder (RS) can project 43,200 ranging points within a 14-meter distance. [4] It also features a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, catering to the focusing needs of most scenarios. Compared with conventional focusing technology, the LiDAR focusing system does not need to rely on the surface texture of the subject. This is especially useful in low-light environments or complicated scenarios with multiple subjects and results in exceptionally stable focus. It supports both Wide Mode and Spot Mode. In Wide Mode, the range finder automatically detects the subject and follows focus. In Spot Mode, users can manually frame or tap the subject to focus.   ALL-NEW FOCUS MOTOR The next-generation DJI RS Focus Motor (2022) provides torque three times stronger (up to 1 N·m) and reduces audible noise by 50%. This delivers a smoother focusing experience and reduces the effect on audio recording. It also adopts a quick-release structure, allowing it to be assembled easily without any tools for faster use.   ENABLES CINEMATIC AUTOFOCUS The pairing of the LiDAR Range Finder with the new Focus Motor also makes cinematic autofocus on manual lenses possible. Press the M button on the gimbal once to quickly switch between manual focus and autofocus to meet your needs for both modes effortlessly. After the calibration of manual lenses, several lens calibration profiles can be stored in the focus motor, so there is no need to re-calibrate before ensuing uses. Certain cinema lenses [5] can even directly connect to the focus motor for autofocus with no need for calibration. Users can also directly connect the LiDAR Range Finder and focus motor to the camera and operate independently from the gimbal, enabling autofocus on manual lenses as well with an external battery. [6]   ACTIVETRACK PRO Tracking on the Ronin series has never been more accurate or responsive.The next-generation ActiveTrack Pro can directly read images from the camera built into the LiDAR Range Finder, with no need for the Ronin Image Transmitter (previously known as the Ronin RavenEye Image Transmitter). The LiDAR Range Finder also carries a self-developed chip identical to the one used by Ronin 4D, which boosts the computing power of ActiveTrack Pro by more than 60 times compared to ActiveTrack 3.0 on the Ronin Image Transmitter. When using ActiveTrack Pro, you can directly monitor or frame the subject on the RS 3 Pro’s OLED touchscreen. [7] The live feed latency is reduced to just 40 ms, 60% lower than that of the Ronin Image Transmitter, allowing for swift tracking, even when the subject is moving fast. With a neural network accelerator, it can identify and track targets, even when they are numerous and at a distance.       PRO-GRADE VIDEO TRANSMISSION   QUICK MOUNTING RS 3 Pro can pair with the all-new DJI Transmission to offer a customized shooting solution. The DJI Video Transmitter can be powered directly by RS 3 Pro and mounts conveniently on the bottom via the cold shoe without the need for an additional battery, reducing the burden for handheld setup.   LONG-RANGE WIRELESS TRANSMISSION O3 Pro Video Transmission supports a 6km/20,000ft [8] video and audio transmission range with ultra-low latency, as well as automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS bands, providing crews with an impressively stable and interference-free remote monitoring experience.   COORDINATED SHOOTING The DJI High-Bright Remote Monitor supports 1080p/60fps live feeds and one transmitter with multiple receivers. In Control mode, two receivers can be used at the same time to collaboratively control RS 3 Pro’s gimbal, focus, and camera parameters for an integrated reception, monitoring, and control experience.       PRO-GRADE WIRELESS CONTROL   GIMBAL AND FOCUS CONTROL [9] The High-Bright Remote Monitor can be used with Ronin 4D Hand Grips, DJI Master Wheels, or DJI Force Pro to control the gimbal and focus precisely. It is also equipped with a built-in gyroscopic sensor that can turn the remote monitor into a standalone motion controller for RS 3 Pro without additional accessories to achieve more complex camera movements from a moving vehicle or with a jib.   SEAMLESS WIRELESS CAMERA CONTROL When RS 3 Pro is mounted to carriers like a jib, cable cam, or a vehicle suction cup mount, Mirror Control mode unlocks seamless wireless control from anywhere on set. This mode allows direct control of the core menu operations for Sony mirrorless cameras [5] via a remote monitor, all without having to detach your camera.         PRO-GRADE ECOSYSTEM   EXTENSIVE EXPANDABILITY With dual RSA/NATO ports and a battery port, RS 3 Pro can be connected to various accessories such as the Twist Grip Dual Handle, Tethered Control Handle, and the new DJI Briefcase Handle to flexibly meet a variety of shooting requirements.   SOLUTIONS FOR ANY SCENARIO With DJI RS SDK protocol, third-party manufacturers and individual developers can now create customized solutions for RS 3 Pro. Whether it’s filming from a moving vehicle, with a jib or Steadicam, or from a cable cam or slider, RS 3 Pro provides you with comprehensive shooting solutions and greater creative possibilities.   RONIN IMAGE TRANSMITTER [10] RS 3 Pro supports two official video transmission solutions. Besides DJI Transmission, the Ronin Image Transmitter provides HD live feeds, remote gimbal and camera control, ActiveTrack 3.0, Force Mobile, and many other features, bringing integrated monitoring and control to independent videographers and small crews.   NEW BRIEFCASE HANDLE [10] The redesigned briefcase handle is foldable for convenient storage, and comes with a new ergonomic handle to make it easier and faster to install and switch to Briefcase mode. The built-in cold shoe mount and 1/4"-20 mounting holes can connect to external monitors for shooting assistance, making low-angle camera movements more intuitive.     Footnotes: 1. Only available with combo purchase.2. Check the camera compatibility list for detailed information on supported camera models.3. Required for use with the LiDAR Range Finder (RS) or Ronin Image Transmitter.4. Tested in an environment without bright lights. During normal shooting conditions, the detection distance of human subjects is 7 meters.5. Check the spec sheet for detailed information on supported camera models.6. Calibration of manual lenses is still required when using with RS 3 Pro.7. Only applicable in bright environments with subjects that have distinguishable characteristics and/or surface textures.8. Measured in Control mode with FCC compliance in a standard, interference-free environment. 9. The High-Bright Remote Monitor, Ronin 4D Hand Grips, DJI Master Wheels, and DJI Force Pro are all sold separately.10. Available through a combo purchase or separate purchase.   Product Specifications PERIPHERAL Accessory PortRSA/NATO Ports1/4""-20 Mounting HoleCold ShoeVideo Transmission/Focus Motor Port (USB-C)RSS Camera Control Port (USB-C)Focus Motor Port (USB-C) BatteryModel: BG30-1950 mAh-15.4VType: LiPo 4SCapacity: 1950 mAhEnergy: 30 WhMax. Runtime: 12 hours[1]Charging Time: Approx. 1.5 hours (using 24W charger; it is recommended to use QC 2.0 or PD protocol chargers)Suggested Charging Temperature: 5° to 40° C (41° to 104° F) ConnectionsBluetooth 5.0Charging Port (USB-C) Ronin App RequirementsiOS 11.0 or aboveAndroid 7.0 or above Languages Supported by the TouchscreenEnglish, Simplified Chinese, Traditional Chinese, German, French, Korean, Japanese, Spanish, Portuguese (Brazil), Russian, Thai WORKING PERFORMANCE Tested Payload4.5 kg (10 lbs) Maximum Controlled Rotation SpeedPan: 360°/sTilt: 360°/sRoll: 360°/s Mechanical RangePan axis: 360° continuous rotationRoll axis: -95° to +240°Tilt axis: -112° to +214° MECHANICAL & ELECTRICAL CHARACTERISTICS Operating Frequency2.400-2.484 GHz MECHANICAL & ELECTRICAL PROPERTIES Bluetooth Transmitter Power<8 dBm Operating Temperature-20° to 45° C (-4° to 113° F) WeightGimbal: Approx. 1,143 g (2.51 lbs)Grip: Approx. 265 g (0.58 lbs)Extended Grip/Tripod (Metal): Approx. 226 g (0.49 lbs)Upper and Lower Quick-Release Plates: Approx. 107 g (0.23 lbs) Gimbal DimensionsFolded: 268×276×68 mm (L×W×H, excluding camera, grip, and the Extended Grip/Tripod)Unfolded: 415×218×195 mm (L×W×H, height includes grip and excludes the Extended Grip/Tripod) DJI RONIN IMAGE TRANSMITTER ConnectionsPower/Communication Port (USB-C)HDMI Port (Mini HDMI)RSS Camera Control Port (USB-C) Expansion PortCold Shoe Operating Frequency2.400-2.484 GHz5.725-5.850 GHz Weight126 g (0.27 lbs) DimensionsLength: 82×63×24 mm (L×W×H) Transmitter Power (EIRP)2.400-2.484 GHz:<25 dBm (FCC)<20 dBm (CE/SRRC/MIC)5.725-5.850 GHz:<25 dBm (FCC/SRRC)<14 dBm (CE) BatteryCapacity: 2970 mAhCompatible Charger: 5 V/2 ACharging Time: Approx. 2.5 hoursOperating Time: Approx. 3.5 hours Transmission Range200 m (SRRC/FCC)[2]100 m (CE)[2] Latency60 ms Operating Current/Voltage900 mA/3.7 V Operating Temperature0° to 45° C (32° to 113° F) DJI LIDAR RANGE FINDER (RS) Accessory PortCold Shoe1/4"-20 Mounting HoleUSB-C PortUSB-C Power/CVBS/CAN Data Port Image SensorResolution: 448×298 on the RS touchscreenFOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)Frame Rate: 30fpsFocal Length: 30mm Equivalent ToF SensorResolution: 240×180Sensing Range: 0.5 to 14 m[3]FOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)Frequency: 25 HzFocal Length: 30mm equivalentDistance Error: 1% Machine LearningFrequency: 30 HzTracking Subjects: Can recognize up to five subjects at the same time, and choose one to followSmart Object Identification: Human face, head, and body Electrical PropertiesPower Consumption: 6.8 WInput: 7 to 16 V Operating Temperature-20° to 45° C (-4° to 113° F) Mechanical PropertiesDimensions: 66×57×24 mm (L×W×H)Weight: Approx. 130 g (0.28 lbs)Mounting Plate Height: 30 mm Lenses that Do Not Need CalibrationDZOFILM Vespid Cyber 35 mmDZOFILM Vespid Cyber 50 mmDZOFILM Vespid Cyber 75 mm Notes1. Measured with the equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.2. In open environments free of obstructions or interference.3. In environments with a brightness level of 80,000 lux or below.   In The Box Carrying Case × 1Gimbal × 1BG30 Grip × 1USB-C Charging Cable (40 cm) × 1Lens-Fastening Support (Extended) × 1Extended Grip/Tripod (Metal) × 1Quick-Release Plate (Arca-Swiss/Manfrotto) × 1Briefcase Handle × 1Multi-Camera Control Cable (USB-C, 30 cm) × 1Screw Kit × 1  

Read more less

DJI RS 3 Pro is an advanced, comprehensive camera expansion platform that empowers videographers and provides coordinated shooting solutions for professional crews.   Product Description NOTHING OUT OF REACH Expanding on the powerful features of the Ronin series, DJI RS 3 Pro is an advanced, comprehensive camera expansion platform that empowers videographers and provides coordinated shooting solutions for professional crews. With DJI RS 3 Pro, nothing is out of reach. PRO-GRADE DESIGN     HANDLE BIG PAYLOADS  RS 3 Pro uses extended carbon fiber axis arms to allow more balancing space for professional cameras, making it a perfect fit for cameras like the Sony FX6 or Canon C70 with 24-70mm F2.8 lenses, expanding creative possibilities. The new Extended Lower Quick-Release Plate [1] ensures more stable camera mounting, and is convenient for installing a lens support for more secure setups. To make the balancing process easier, a fine-tuning knob has been added for the tilt axis to move the camera forward or backward more precisely, even down to the millimeter. With Teflon®-coated components, RS 3 Pro can be balanced with less friction and lower resistance, even when mounting heavy cameras.   AUTOMATED AXIS LOCKS RS 3 Pro allows you to get started fast to never miss a shot. Simply press and hold the power button and the three axes unlock and expand automatically, allowing you to start shooting within seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making company move significantly more efficient. Press and hold the power button and it will fold and lock automatically.   HIGH-CAPACITY PAYLOADS The optimized structural design of RS 3 Pro ensures that its weight remains the same as RS 2 at just 1.5 kg/3.3 lbs (includes gimbal, battery grip, and dual-layered quick-release plates), while its load capacity is a robust 4.5 kg/10 lbs, delivering powerful support in a lightweight body.   WIRELESS SHUTTER CONTROL Equipped with Dual-Mode Bluetooth technology, RS 3 Pro is able to achieve efficient and reliable wireless shutter control. [2] After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. A previously paired camera will automatically reconnect, saving you time with every ensuing use.   INSTANT MODE SWITCHING By simply sliding the new Gimbal Mode Switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started fast.   BIGGER IS BETTER A large, built-in 1.8-inch OLED full-color touchscreen increases screen size by 28% compared to RS 2, making it incredibly convenient for setting parameters, checking shooting status, and framing your tracked subjects. [3] And with the redesigned user interface, every setting is more intuitive and precise. The OLED screen also offers higher brightness than the LCD screen of RS 2 for better outdoor viewing with lower power consumption.     PRO-GRADE STABILIZATION   SLEEK CARBON FIBER CONSTRUCTION The RS 3 Pro arms are constructed from layered sheets of uncut carbon fiber, just like the Ronin 2. This makes it lighter and stronger than the jointed carbon fiber material used on RS 2, increasing stiffness and lowering weight to cope with even more demanding shooting environments.   THE NEXT EVOLUTION OF RS STABILIZATION  Empowered by the third generation of RS stabilization algorithms, RS 3 Pro provides significantly enhanced stability in any scenario. Laboratory sampling data shows RS 3 Pro provides a 20% increase in stability over RS 2, effortlessly managing low-angle shots, running scenarios, or switching between high and low positions.   GET SUPERSMOOTH RESULTS When SuperSmooth mode is enabled, RS 3 Pro increases motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or when using 100mm-equivalent focal length lenses.       PRO-GRADE FOCUSING   LIDAR ASSISTANCE To make focusing easier, Ronin 4D’s LiDAR focusing technology is applied to RS 3 Pro. The new LiDAR Range Finder (RS) can project 43,200 ranging points within a 14-meter distance. [4] It also features a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, catering to the focusing needs of most scenarios. Compared with conventional focusing technology, the LiDAR focusing system does not need to rely on the surface texture of the subject. This is especially useful in low-light environments or complicated scenarios with multiple subjects and results in exceptionally stable focus. It supports both Wide Mode and Spot Mode. In Wide Mode, the range finder automatically detects the subject and follows focus. In Spot Mode, users can manually frame or tap the subject to focus.   ALL-NEW FOCUS MOTOR The next-generation DJI RS Focus Motor (2022) provides torque three times stronger (up to 1 N·m) and reduces audible noise by 50%. This delivers a smoother focusing experience and reduces the effect on audio recording. It also adopts a quick-release structure, allowing it to be assembled easily without any tools for faster use.   ENABLES CINEMATIC AUTOFOCUS The pairing of the LiDAR Range Finder with the new Focus Motor also makes cinematic autofocus on manual lenses possible. Press the M button on the gimbal once to quickly switch between manual focus and autofocus to meet your needs for both modes effortlessly. After the calibration of manual lenses, several lens calibration profiles can be stored in the focus motor, so there is no need to re-calibrate before ensuing uses. Certain cinema lenses [5] can even directly connect to the focus motor for autofocus with no need for calibration. Users can also directly connect the LiDAR Range Finder and focus motor to the camera and operate independently from the gimbal, enabling autofocus on manual lenses as well with an external battery. [6]   ACTIVETRACK PRO Tracking on the Ronin series has never been more accurate or responsive.The next-generation ActiveTrack Pro can directly read images from the camera built into the LiDAR Range Finder, with no need for the Ronin Image Transmitter (previously known as the Ronin RavenEye Image Transmitter). The LiDAR Range Finder also carries a self-developed chip identical to the one used by Ronin 4D, which boosts the computing power of ActiveTrack Pro by more than 60 times compared to ActiveTrack 3.0 on the Ronin Image Transmitter. When using ActiveTrack Pro, you can directly monitor or frame the subject on the RS 3 Pro’s OLED touchscreen. [7] The live feed latency is reduced to just 40 ms, 60% lower than that of the Ronin Image Transmitter, allowing for swift tracking, even when the subject is moving fast. With a neural network accelerator, it can identify and track targets, even when they are numerous and at a distance.       PRO-GRADE VIDEO TRANSMISSION   QUICK MOUNTING RS 3 Pro can pair with the all-new DJI Transmission to offer a customized shooting solution. The DJI Video Transmitter can be powered directly by RS 3 Pro and mounts conveniently on the bottom via the cold shoe without the need for an additional battery, reducing the burden for handheld setup.   LONG-RANGE WIRELESS TRANSMISSION O3 Pro Video Transmission supports a 6km/20,000ft [8] video and audio transmission range with ultra-low latency, as well as automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS bands, providing crews with an impressively stable and interference-free remote monitoring experience.   COORDINATED SHOOTING The DJI High-Bright Remote Monitor supports 1080p/60fps live feeds and one transmitter with multiple receivers. In Control mode, two receivers can be used at the same time to collaboratively control RS 3 Pro’s gimbal, focus, and camera parameters for an integrated reception, monitoring, and control experience.       PRO-GRADE WIRELESS CONTROL   GIMBAL AND FOCUS CONTROL [9] The High-Bright Remote Monitor can be used with Ronin 4D Hand Grips, DJI Master Wheels, or DJI Force Pro to control the gimbal and focus precisely. It is also equipped with a built-in gyroscopic sensor that can turn the remote monitor into a standalone motion controller for RS 3 Pro without additional accessories to achieve more complex camera movements from a moving vehicle or with a jib.   SEAMLESS WIRELESS CAMERA CONTROL When RS 3 Pro is mounted to carriers like a jib, cable cam, or a vehicle suction cup mount, Mirror Control mode unlocks seamless wireless control from anywhere on set. This mode allows direct control of the core menu operations for Sony mirrorless cameras [5] via a remote monitor, all without having to detach your camera.         PRO-GRADE ECOSYSTEM   EXTENSIVE EXPANDABILITY With dual RSA/NATO ports and a battery port, RS 3 Pro can be connected to various accessories such as the Twist Grip Dual Handle, Tethered Control Handle, and the new DJI Briefcase Handle to flexibly meet a variety of shooting requirements.   SOLUTIONS FOR ANY SCENARIO With DJI RS SDK protocol, third-party manufacturers and individual developers can now create customized solutions for RS 3 Pro. Whether it’s filming from a moving vehicle, with a jib or Steadicam, or from a cable cam or slider, RS 3 Pro provides you with comprehensive shooting solutions and greater creative possibilities.   RONIN IMAGE TRANSMITTER [10] RS 3 Pro supports two official video transmission solutions. Besides DJI Transmission, the Ronin Image Transmitter provides HD live feeds, remote gimbal and camera control, ActiveTrack 3.0, Force Mobile, and many other features, bringing integrated monitoring and control to independent videographers and small crews.   NEW BRIEFCASE HANDLE [10] The redesigned briefcase handle is foldable for convenient storage, and comes with a new ergonomic handle to make it easier and faster to install and switch to Briefcase mode. The built-in cold shoe mount and 1/4"-20 mounting holes can connect to external monitors for shooting assistance, making low-angle camera movements more intuitive.     Footnotes: 1. Only available with combo purchase.2. Check the camera compatibility list for detailed information on supported camera models.3. Required for use with the LiDAR Range Finder (RS) or Ronin Image Transmitter.4. Tested in an environment without bright lights. During normal shooting conditions, the detection distance of human subjects is 7 meters.5. Check the spec sheet for detailed information on supported camera models.6. Calibration of manual lenses is still required when using with RS 3 Pro.7. Only applicable in bright environments with subjects that have distinguishable characteristics and/or surface textures.8. Measured in Control mode with FCC compliance in a standard, interference-free environment. 9. The High-Bright Remote Monitor, Ronin 4D Hand Grips, DJI Master Wheels, and DJI Force Pro are all sold separately.10. Available through a combo purchase or separate purchase.   Product Specifications PERIPHERAL Accessory PortRSA/NATO Ports1/4""-20 Mounting HoleCold ShoeVideo Transmission/Focus Motor Port (USB-C)RSS Camera Control Port (USB-C)Focus Motor Port (USB-C) BatteryModel: BG30-1950 mAh-15.4VType: LiPo 4SCapacity: 1950 mAhEnergy: 30 WhMax. Runtime: 12 hours[1]Charging Time: Approx. 1.5 hours (using 24W charger; it is recommended to use QC 2.0 or PD protocol chargers)Suggested Charging Temperature: 5° to 40° C (41° to 104° F) ConnectionsBluetooth 5.0Charging Port (USB-C) Ronin App RequirementsiOS 11.0 or aboveAndroid 7.0 or above Languages Supported by the TouchscreenEnglish, Simplified Chinese, Traditional Chinese, German, French, Korean, Japanese, Spanish, Portuguese (Brazil), Russian, Thai WORKING PERFORMANCE Tested Payload4.5 kg (10 lbs) Maximum Controlled Rotation SpeedPan: 360°/sTilt: 360°/sRoll: 360°/s Mechanical RangePan axis: 360° continuous rotationRoll axis: -95° to +240°Tilt axis: -112° to +214° MECHANICAL & ELECTRICAL CHARACTERISTICS Operating Frequency2.400-2.484 GHz MECHANICAL & ELECTRICAL PROPERTIES Bluetooth Transmitter Power<8 dBm Operating Temperature-20° to 45° C (-4° to 113° F) WeightGimbal: Approx. 1,143 g (2.51 lbs)Grip: Approx. 265 g (0.58 lbs)Extended Grip/Tripod (Metal): Approx. 226 g (0.49 lbs)Upper and Lower Quick-Release Plates: Approx. 107 g (0.23 lbs) Gimbal DimensionsFolded: 268×276×68 mm (L×W×H, excluding camera, grip, and the Extended Grip/Tripod)Unfolded: 415×218×195 mm (L×W×H, height includes grip and excludes the Extended Grip/Tripod) DJI RONIN IMAGE TRANSMITTER ConnectionsPower/Communication Port (USB-C)HDMI Port (Mini HDMI)RSS Camera Control Port (USB-C) Expansion PortCold Shoe Operating Frequency2.400-2.484 GHz5.725-5.850 GHz Weight126 g (0.27 lbs) DimensionsLength: 82×63×24 mm (L×W×H) Transmitter Power (EIRP)2.400-2.484 GHz:<25 dBm (FCC)<20 dBm (CE/SRRC/MIC)5.725-5.850 GHz:<25 dBm (FCC/SRRC)<14 dBm (CE) BatteryCapacity: 2970 mAhCompatible Charger: 5 V/2 ACharging Time: Approx. 2.5 hoursOperating Time: Approx. 3.5 hours Transmission Range200 m (SRRC/FCC)[2]100 m (CE)[2] Latency60 ms Operating Current/Voltage900 mA/3.7 V Operating Temperature0° to 45° C (32° to 113° F) DJI LIDAR RANGE FINDER (RS) Accessory PortCold Shoe1/4"-20 Mounting HoleUSB-C PortUSB-C Power/CVBS/CAN Data Port Image SensorResolution: 448×298 on the RS touchscreenFOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)Frame Rate: 30fpsFocal Length: 30mm Equivalent ToF SensorResolution: 240×180Sensing Range: 0.5 to 14 m[3]FOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)Frequency: 25 HzFocal Length: 30mm equivalentDistance Error: 1% Machine LearningFrequency: 30 HzTracking Subjects: Can recognize up to five subjects at the same time, and choose one to followSmart Object Identification: Human face, head, and body Electrical PropertiesPower Consumption: 6.8 WInput: 7 to 16 V Operating Temperature-20° to 45° C (-4° to 113° F) Mechanical PropertiesDimensions: 66×57×24 mm (L×W×H)Weight: Approx. 130 g (0.28 lbs)Mounting Plate Height: 30 mm Lenses that Do Not Need CalibrationDZOFILM Vespid Cyber 35 mmDZOFILM Vespid Cyber 50 mmDZOFILM Vespid Cyber 75 mm Notes1. Measured with the equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.2. In open environments free of obstructions or interference.3. In environments with a brightness level of 80,000 lux or below.   In The Box Carrying Case × 1Gimbal × 1BG30 Grip × 1USB-C Charging Cable (40 cm) × 1Lens-Fastening Support (Extended) × 1Extended Grip/Tripod (Metal) × 1Quick-Release Plate (Arca-Swiss/Manfrotto) × 1Briefcase Handle × 1Lower Quick-Release Plate (Extended) × 1Phone Holder × 1Focus Motor (2022) × 1Focus Motor Rod Mount Kit Combo × 1Focus Gear Strip × 1Ronin Image Transmitter × 1USB-C Power Cable (20 cm) × 1Mini-HDMI to HDMI Cable (20 cm) × 1Mini-HDMI to Mini-HDMI Cable (20 cm) × 1Mini-HDMI to Micro-HDMI Cable (20 cm) × 1Multi-Camera Control Cable (USB-C, 30 cm) × 2Lens-Fastening Strap × 1Hook-and-Loop Strap × 2Screw Kit × 1

Read more less

GorillaPod Mobile Creator Kit with GripTight phone clamp and Wavo Mobile vlogging microphone Fun starter kit that turns your smartphone or camera into a handy rig for vlogging, streaming, and content creation Product Description GorillaPod Mobile Creator Kit with GripTight phone clamp and Wavo Mobile vlogging microphone Fun starter kit that turns your smartphone or camera into a handy rig for vlogging, streaming, and content creation GripTight Smart Mount securely holds up to Pro Max size phoneWorks in landscape or portrait modeGorillaPod legs wrap around objects for unlimited anglesCompact and Portable Microphone - perfect size for phone & CSCSuperior Shock Isolation - Rycote® Lyre® shock mount The JOBY® GorillaPod Creator Kit is an awesome kit designed for vloggers and content creators.It features the mobile vlogger’s dream base of GorillaPod 1K legs, GripTight™ Smart phone clamp, and Wavo™ Mobile microphone. Specifications: Weight: 0.25 kgDimensions: 7 x 8.1 x 34.5 cmCapacity: 1 kgColour: BlackProduct Contents: GorillaPod 1K Stand, GripTight Smart phone clamp, Wavo Mobile microphone, shock mount, Windjammer wind shield, TRS cable, TRRS cable, pouch

Read more less

Uses O3 Pro video transmission technology for a 20,000-foot transmission range of 1080p/60fps FHD feeds. Supports additional DFS frequency band. Availability: Pre-Order ETA 26 September 2022 Product Description Note: The DJI Video Transmitter must be used with the DJI High-Bright Remote Monitor.  FEATURES With the latest O3 Pro video transmission technology, the DJI Video Transmitter offers a stunning 20,000-foot [2] ground transmission range. In addition to 2.4 GHz and 5.8 GHz, it supports the DFS frequency band and an AES 256-bit encryption algorithm that can output a 1080p/60fps FHD feed to multiple remote monitors simultaneously with significantly enhanced security, stability, and anti-interference capability.   Tips 1. Requires the DJI High-Bright Remote Monitor for use.2. Measured in Control mode with FCC compliance in a standard, interference-free environment. Compatibility DJI High-Bright Remote MonitorDJI Ronin 2 DJI RS 3 Pro   Product Specifications Max Transmission Distance: Approx. 20,000 ft (approx. 6 km for FCC, approx. 4 km for CE/SRRC/MIC)Max Resolution and Frame Rate: 1920×1080@60fpsOperating Frequency:Non-DFS Frequency Band2.400-2.484 GHz5.150-5.250 GHz5.725-5.850 GHzDFS Frequency Band5.250-5.350 GHz5.470-5.600 GHz5.650-5.725 GHzMax Bandwidth: 40 MHz   In The Box Video Transmitter × 1Ronin Video Transmission Antenna × 2WB37 Battery Adapter (TX) × 1NP-F Battery Adapter (TX) × 1USB-C Cable ×1 SDI Cable × 1DJI DC Power Cable × 1DC to P-TAP Power Cable × 1USB-C to LEMO Power Cable × 1RS Gimbal Mounting Plate × 1Installation Toolkit × 1  

Read more less

The DJI High-Bright Remote Monitor is integrated with a wide colour gamut display and image transmission receiver and can be used for monitoring, recording, and playback.   With a 7-inch wide colour gamut, 1,500-nit high-bright touchscreen, and an integrated O3 Pro image transmission receiver, the DJI High-Bright Remote Monitor can be used for monitoring, recording, and playback. It also works seamlessly with the Hand Grips, DJI Master Wheels, DJI Force Mobile, and the new DJI Three-Channel Follow Focus to enable remote control of focus, gimbal movements, and camera functions. (Note: Must be used with the DJI Ronin 4D Video Transmitter). The DJI High-Bright Remote Monitor is integrated with a wide color gamut display and image transmission receiver and can be used for monitoring, recording, and playback. When used with the DJI Remote Monitor Expansion Plate, outputs of HDMI and SDI signals can be achieved.   Highlights 1,500-nit high-bright monitor7-inch wide color gamut touchscreen displayOutput of HDMI and SDI signalsMirror Control ModeIndependent recording and playbackRemote parameter setting, remote controlMotion controlCustomizable LUT and independent LUT for monitoringFocus assistance and exposure assistanceIndependent monitoring of HDMI input   Compatibility DJI Ronin 4D Video Transmitter   In The Box High-Bright Remote Monitor × 1Ronin Video Transmission Antenna × 4Remote Monitor Tempered Glass Screen Protector × 1Remote Monitor Hood × 1Remote Monitor Cage × 1NP-F Battery Adapter × 1WB37 Intelligent Battery × 1WB37 Battery Charging Hub (USB-C) × 11.5mm Ball-End Hex Key × 1  

Read more less

14m range and has a built-in camera with a 30mm-equivalent focal length and 70° FOV. Enables autofocus on manual lenses and enhances tracking. The LiDAR focusing system makes focusing easier for hand-held shooting, without relying on the surface texture of the subject. This is especially useful in low-light environments and results in exceptional focusing capabilities. The new LiDAR Range Finder (RS) can project 43,200 ranging points, detect within a 14-meter range, and has a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, which can handle the focusing needs of most scenarios. Pairing with the new Focus Motor (2022) also makes autofocus on manual lenses possible after calibration, and several lens calibration profiles can be stored. With the LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance. Tips 1. Tested in an environment without strong light. In normal shooting environments, the detection distance of human subjects is 7 meters. 2. In environments with 80,000 lux or less of brightness. Compatibility DJI RS 3 Pro   Product Specifications Accessory Port:Cold Shoe1/4"-20 Mounting HoleUSB-C PortUSB-C Power/CVBS/CAN Data Port Image Sensor:Resolution: 448×298 on the touchscreenFOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)Focal Length: 30mm equivalent ToF sensor:Resolution: 240×180Sensing Range: 0.5-14 m [2]Distance Error: 1% Machine Learning:Can recognize up to five targets at the same time, and choose one to follow.Identification Distance: 9 m Electrical Properties:Power Consumption: 6.8 WInput: 7 to 16 V Operating Temperature:-20° to 45°C (-4° to 113° F) Mechanical Properties:Dimensions: 66×57×24 mm (L×W×H)Weight: Approx. 130 gMounting Plate Height: 30 mm Lenses that Do Not Needs Calibration:DZOFILM Vespid Cyber 35/50/75 mm   In The Box LiDAR Range Finder (RS) × 1Multi-Camera Control Cable (USB-C, 30 cm) × 1LiDAR Control Cable (USB-C, 30 cm) × 1  

Read more less

Power your X3 action camera with this Rechargeable 1800mAh Battery from Insta360. With a 10% increased capacity for a total of 1800mAh, this battery ensures you can capture all the action for up to 81 minutes. Its lithium-ion chemistry can be recharged in just 90 minutes for continued use. Included with the battery is a box to store it in with built-in memory card storage.   Compatibility Insta360 X3 PRODUCT SPECIFICATIONS Battery Chemistry: Lithium-IonBattery Capacity: 1800 mAhOutput Voltage: 3.85 VDCCharging Power: 4.4 VDCRecharge Time: 90 MinutesMaximum Battery Life: 81 MinutesOperating Temperature: -20 to 40°CCharging Temperature: 0 to 40°C IN THE BOX Insta360 X3 Battery × 1

Read more less

The Fast Charging Hub for the Insta360 X3 camera charges up to three X3 batteries simultaneously. Batteries charge in approximately 90 minutes, with an LED above each battery slot confirming whether the battery is charging, charged, or not charging because of malfunction. A USB Type-C charging port provides power to the hub and overcharge protection ensures intelligent charging management.   Compatibility Insta360 X3 Battery PRODUCT SPECIFICATIONS USB Input/Output: 1 x USB Type-C Female InputPower Source: USBDC Input Power: 12 VDC at 3 AOperating Temperature: 0 to 40°CColour: BlackCable Length: Not Specified by ManufacturerDimensions: 71.8 x 60.4 x 31.6 mmWeight: 96 g IN THE BOX Insta360 X3 Fast Charge Hub × 1 (batteries sold separately. 

Read more less