DJI Power Stations
DJI Power 1000 Portable Power Station
DJI Power 1000 Power Your World Product Highlights 2400W Max Output Power [1] Meets power demands of over 99% of common household appliances [2] Fully Charged in 70 Mins [3] Recharged to 80% in just 50 mins [3] Supports Solar Charging Ultra-Quiet Operation Dual PD 3.1 USB-C Out Ports (140W Max) [4] Up to 5 Years of Warranty Comprehensive Safety LFP cell with a service life of approx. 10 years Fast Charges DJI Drones [5] DJI Power SDC super-fast charge Power Supply/Recharging in Multiple Scenarios [Stable High-Power AC Output] DJI Power 1000 has a battery capacity of 1024 Wh, providing a max AC output power of 2400 W. [1] It can also fast charge DJI drone batteries to unleash your aerial content creation. 1024Wh Capacity Charging Ability Camping and Road Trips Content Creation DIY Home Backup Battery Mobile Phone Approx. 57 times Digital Camera Approx. 59 times Electric Jack Hammer Approx. 1.2 hours Wi-Fi Router Approx. 76.8 hours Camping Light Approx. 32 times Laptop Approx. 9 times Electric Chainsaw Approx. 29 mins Refrigerator Approx. 45 hours Coffee Machine Approx. 55 mins Drone Approx. 12 times Power Saw Approx. 40 mins Lamp Approx. 92 hours Projector Approx. 9.2 hours Photography Lighting Equipment Approx. 1.2 hours / Rice Cooker Approx. 1.2 hours Car Refrigerator Approx. 19 hours Speaker Approx. 64 times / Juicer Approx. 3.6 hours Electric Fan Approx. 9 hours / / Microwave Oven Approx. 1.3 hours * Measured under 25° C (77° F) laboratory conditions, using DJI Power 1000 to charge products of certain brands. The data is for reference only. Actual user experience may vary. Which Product is Right for You? The robust DJI Power 1000 provides stable power supply to more than 99% of common household devices. [2] Click the button below to choose your common scenarios and appliances, and find the product portfolio best suited for you. Fast Charges DJI Drones With the aid of separately-sold charging cables, you can fast charge select DJI drone batteries with the DJI Power SDC super-fast charge function, [5] and be up in the air within approximately 30 mins. With three drone batteries and a DJI portable power station, you can enjoy an entire day of worry-free flight and creation. Mavic 3 Series Intelligent Flight Battery [7] Approx. 32 mins Battery level from 10% to 95% DJI Air 3 Intelligent Flight Battery Approx. 30 mins Battery level from 10% to 95% Inspire 3 TB51 Intelligent Flight Battery Approx. 28 mins Battery level from 10% to 95% M30 TB30 Intelligent Flight Battery Approx. 32 mins Battery level from 10% to 95% * The above charging time data was measured in a controlled test environment and is for reference only. [Multiple Recharging Options] DJI Power 1000 can be recharged in three ways: grid power, solar power, and car power. Whether indoors or on the road, you can flexibly choose the recharging method that works for you. Grid Power It's fast and easy to plug in, recharge, and go. When connected to grid power, DJI Power 1000 supports both 1200W Fast Recharge Mode and 600W Standard Recharge Mode, with the quickest recharging time being 70 minutes for 100% battery. It can also charge to 80% in just 50 minutes. [3] Solar Power DJI Power 1000 can be connected to solar panels through the DJI Power Solar Panel Adapter Module (MPPT) or the DJI Power Car Power Outlet to SDC Power Cable, [8] and recharged with environmentally friendly solar power. MPPT (Maximum Power Point Tracking) is an intelligent algorithm that supports real-time monitoring of the voltage generated by connected solar panels. By tracking and maintaining the highest voltage and current values (V-I), the algorithm allows the solar panels to recharge DJI Power 1000 in an optimized and efficient way. * Solar panels from DJI-certified brand Zignes are recommended. DJI Power 1000 supports a max solar power input of 800 W, and it can be fully recharged by solar power in approx. 1.35 to 2.8 hours. [9] Car Power Easily supercharge any road trip. With the DJI Power Car Power Outlet to SDC Power Cable (12V/24V), you can fully recharge DJI Power 1000 via car charger. Safety Design Safe and Secure, Inside and Out Safety comes first at all times. From the body structure and cell chemistry to the system software, DJI Power 1000 features a comprehensive safety design. It has passed 26 product test certifications from the Swiss third-party testing authority SGS, ensuring worry-free electrical usage. Intelligent Battery Management System (BMS) When the safety threshold of electricity usage is surpassed, the protective mechanism for supplying power and recharging will kick into action automatically. And once electricity supply returns to normal, DJI Power 1000 will resume operation. LFP Cell The LFP cell is safe and durable, and can achieve 4000 cycles, [10] providing a lifespan of approximately 10 years, even with frequent use. [11] SGS Switzerland Authority Certification Thanks to its comprehensive safety design, DJI Power 1000 has gained the high-quality portable power station certification from SGS Switzerland, and received 26 product test certifications, including 2 product test verifications, 4 mechanical performance tests, 9 electrical performance tests, 3 environmental resistance tests, 5 noise-level tests, and 3 intelligent and efficient DC power-supplying and recharging tests. Safe and Reliable Power Usage 11 Temperature Sensors 11 temperature sensors on the device continually monitor heat dissipation, and the power station can function normally even in temperatures as high as 40° C (104° F). [12] Power Outage Protection Ten fuses located throughout the power station provide circuit protection for each module. Even if there is a circuit abnormality, DJI Power 1000 will respond quickly and safely. High-Strength Structure The power station uses flame-retardant material and supports weight up to 100 kg (220 lbs), [12] further enhancing reliable protection. UPS Mode, Seamless Power Continuity If an electrical device is connected to a powered-on DJI Power 1000 (via AC output port) and both are receiving grid power, DJI Power 1000 defaults to UPS (Uninterruptible Power Supply) mode. In cases of sudden power outage, DJI Power 1000 can start powering the connected device (or devices) within 0.02 seconds, [12] ensuring continued operation. Ultra-Quiet Operation The noise level of DJI Power 1000 is as low as 23 dB [13] during recharging, lower than most household refrigerators, so there is no noise disturbance even in quiet environments. Ample Accessories [Extensive Ports, Expanded Applications] Dual USB-C Out Ports (140W Max) DJI Power 1000 has two 140W USB-C output ports, [4] with a total power output of up to 280 W, a 40% increase compared to the commonly found dual 100W USB-C output ports on the market. It easily meets the electricity demands of most USB-C port devices, while supporting up to PD 3.1 140W charging that can fast charge a 16-inch MacBook Pro. Extensive Accessories DJI Power 1000 has dual USB-A ports, dual AC output ports, one SDC port, one SDC Lite port, and two 1/4″ thread holes. It is highly versatile to make power usage in various scenarios more convenient. It can connect to different types of solar panels, power cables, and adapter cables, meeting the needs of a variety of power supply and recharging options. DJI Power Solar Panel Adapter Module (MPPT) Connect to one to three solar panels and recharge DJI Power 1000 with solar power. DJI Power Car Power Outlet to SDC Power Cable (12V/24V) Can connect to one solar panel to recharge DJI Power 1000 via solar power, or recharge DJI Power 1000 via car charger. Zignes 120W Solar Panel (Outside North America) Zignes 100W Solar Panel (North America Only) When paired with the DJI-certified Zignes solar panels, DJI Power 1000 can be recharged via solar power using the DJI Power Solar Panel Adapter Module (MPPT). DJI Power SDC to Matrice 30 Series Fast Charge Cable 230W fast charge, charge a Matrice 30 battery from 10% to 95% in 32 mins. DJI Power SDC to DJI Air 3 Fast Charge Cable 125W fast charge, charge an Air 3 battery from 10% to 95% in 30 mins. DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable 150W fast charge, charge a Mavic 3 series battery from 10% to 95% in 32 mins. DJI Power SDC to DJI Inspire 3 Fast Charge Cable 200W fast charge, charge an Inspire 3 series battery from 10% to 95% in 28 mins. DJI Power SDC to XT60 Power Cable (12 V) With this cable, DJI Power 1000 can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors. DJI Power SDC to Car Charger Plug Power Cable (12 V) Using this cable, DJI Power 1000 can charge car-powered devices that have a car charger plug, such as a car refrigerator. DJI Power 1000 Protective Storage Case Protect the power station from bumps and dust, and make it more convenient to carry. * All of the aforementioned accessories are sold separately. All aforementioned charging data was measured in a controlled test environment and is for reference only. Actual user experience may vary. ** Certain accessories are currently out of stock. Stay tuned to DJI updates on availability. *** Actual appearance of certain accessories may vary. Notes * The appearance of products sold in different countries and regions may vary. Refer to the actual item. Available when the product's battery level is above 20%. Device power does not exceed 2000 W. Data tested under laboratory conditions at 25° C (77° F) and should be used for reference only. Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications. Requires certain accessories, which are sold separately. DJI Power 1000 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after registration. Consult customer service on DJI Store for more details. Supports DJI Mavic 3 Pro Series, Mavic 3 Classic, Mavic 3 Series, and Mavic 3 Enterprise Series. DJI Power 1000 can connect to up to two DJI Power Solar Panel Adapter Modules (MPPT), which can then connect up to three solar panels, meaning up to six solar panels can be connected to DJI Power 1000 at the same time. Additionally, DJI Power 1000 can connect to one solar panel through the DJI Power Car Power Outlet to SDC Power Cable. Requires the DJI Power Solar Panel Adapter Module (MPPT) and solar panels. The aforementioned accessories are sold separately. The minimum time to fully recharge was measured under 25° C (77° F) laboratory conditions and is for reference only. Actual recharging time is subject to factors like the angle of sunlight and light intensity. Actual user experience may vary. To use solar panels not officially recommended by DJI, convert the solar panel connector to an XT60 interface. To prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of each solar panel is less than 30 V. The power output of each solar panel connected to a single XT60 interface should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W. Measured under 25° C (77° F) laboratory conditions, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W. Based on the correct usage of the product, DJI Power 1000 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle on a daily basis. This data is for reference only. Actual user experience may vary. Data measured in a DJI laboratory. Measured 100 cm away from DJI Power 1000 while it was being recharged in the Standard Recharging Mode and is for reference only. During power output, the device being charged must support the PD 3.0 protocol. During power input (recharging the power station), the charger must support the PD 3.0 protocol. DJI Power 1000 Specifications: Model DYM1000L/DYM1000H Capacity 1024 Wh Net Weight Approx. 13 kg Dimensions 448×225×230 mm (L×W×H) Number of Ports "AC Output × 2<br> USB-C × 2<br> USB-A × 2<br> SDC × 1<br> SDC Lite × 1<br> AC Input × 1" Max Operating Altitude 3000 m AC Output "DYM1000L: AC 100-120 V, 50/60 Hz, max continuous output: 2200 W<br> DYM1000H: AC 220-240 V, 50/60 Hz, max continuous output: 2400 W<br><br> <sup>Max continuous output power is available when the product's battery level is above 20%. AC output data varies by country and region. </sup><br> <sup>Given that the voltage in Japan is 100 V, the max continuous output power of the Japanese version is 2000 W.</sup>" AC Output (Bypass Mode) "DYM1000L: AC 100-120 V, 12 A, 1440 W<br> DYM1000H: AC 220-240 V, 10 A, 2200 W" USB-A Output "5 V, 3 A<br> 9 V, 2 A<br> 12 V, 2 A<br> Max output power per channel: 24 W" USB–C Output "5 V, 5 A<br> 9 V, 5 A<br> 12 V, 5 A<br> 15 V, 5 A<br> 20 V, 5 A<br> 28 V, 5 A (EPR)<br> Max output power per channel: 140 W*<br> <sup>* The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.</sup>" SDC and SDC Lite Output "SDC: 9-27 V, max current: 10 A, max output power: 240 W<br> SDC Lite: 9-27 V, max current: 10 A, max output power: 240 W<br><br> <sup>Both of the SDC and SDC Lite ports support extensive accessories.</sup>" AC Input "DYM1000L: AC 100-120 V, 1200 W (recharging), 1440 W (Bypass mode)<br> DYM1000H: AC 220-240 V, 1200 W (recharging), 2200 W (Bypass mode)" SDC and SDC Lite Input "SDC: DC 32-58.4 V, max 400 W, 8 A<br> SDC Lite: DC 32-58.4 V, max 400 W, 8 A<br> <sup>Both of the SDC and SDC Lite ports support extensive accessories.</sup>" Cell Chemistry LFP (lithium ferrophosphate) Cycle Life "Maintains over 70% capacity after 4000 cycles.<br> <sup>Measured at 25℃/77°F room temperature, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W.</sup>" Power Supply Temperature -10° to 45° C (14° to 113° F) Recharging Temperature 0° to 45° C (32° to 113° F) Storage Temperature -10° to 45° C (14° to 113° F) 3 In the Box DJI Power 1000 × 1 DJI Power AC Power Cable × 1
$1,799.00$1,589.00
DJI Power 1000 Portable Power Station 120w Solar Bundle
DJI Power 1000 Power Your World Product Highlights 2400W Max Output Power [1] Meets power demands of over 99% of common household appliances [2] Fully Charged in 70 Mins [3] Recharged to 80% in just 50 mins [3] Supports Solar Charging Ultra-Quiet Operation Dual PD 3.1 USB-C Out Ports (140W Max) [4] Up to 5 Years of Warranty Comprehensive Safety LFP cell with a service life of approx. 10 years Fast Charges DJI Drones [5] DJI Power SDC super-fast charge Power Supply/Recharging in Multiple Scenarios [Stable High-Power AC Output] DJI Power 1000 has a battery capacity of 1024 Wh, providing a max AC output power of 2400 W. [1] It can also fast charge DJI drone batteries to unleash your aerial content creation. 1024Wh Capacity Charging Ability Camping and Road Trips Content Creation DIY Home Backup Battery Mobile Phone Approx. 57 times Digital Camera Approx. 59 times Electric Jack Hammer Approx. 1.2 hours Wi-Fi Router Approx. 76.8 hours Camping Light Approx. 32 times Laptop Approx. 9 times Electric Chainsaw Approx. 29 mins Refrigerator Approx. 45 hours Coffee Machine Approx. 55 mins Drone Approx. 12 times Power Saw Approx. 40 mins Lamp Approx. 92 hours Projector Approx. 9.2 hours Photography Lighting Equipment Approx. 1.2 hours / Rice Cooker Approx. 1.2 hours Car Refrigerator Approx. 19 hours Speaker Approx. 64 times / Juicer Approx. 3.6 hours Electric Fan Approx. 9 hours / / Microwave Oven Approx. 1.3 hours * Measured under 25° C (77° F) laboratory conditions, using DJI Power 1000 to charge products of certain brands. The data is for reference only. Actual user experience may vary. Which Product is Right for You? The robust DJI Power 1000 provides stable power supply to more than 99% of common household devices. [2] Click the button below to choose your common scenarios and appliances, and find the product portfolio best suited for you. Fast Charges DJI Drones With the aid of separately-sold charging cables, you can fast charge select DJI drone batteries with the DJI Power SDC super-fast charge function, [5] and be up in the air within approximately 30 mins. With three drone batteries and a DJI portable power station, you can enjoy an entire day of worry-free flight and creation. Mavic 3 Series Intelligent Flight Battery [7] Approx. 32 mins Battery level from 10% to 95% DJI Air 3 Intelligent Flight Battery Approx. 30 mins Battery level from 10% to 95% Inspire 3 TB51 Intelligent Flight Battery Approx. 28 mins Battery level from 10% to 95% M30 TB30 Intelligent Flight Battery Approx. 32 mins Battery level from 10% to 95% * The above charging time data was measured in a controlled test environment and is for reference only. [Multiple Recharging Options] DJI Power 1000 can be recharged in three ways: grid power, solar power, and car power. Whether indoors or on the road, you can flexibly choose the recharging method that works for you. Grid Power It's fast and easy to plug in, recharge, and go. When connected to grid power, DJI Power 1000 supports both 1200W Fast Recharge Mode and 600W Standard Recharge Mode, with the quickest recharging time being 70 minutes for 100% battery. It can also charge to 80% in just 50 minutes. [3] Solar Power DJI Power 1000 can be connected to solar panels through the DJI Power Solar Panel Adapter Module (MPPT) or the DJI Power Car Power Outlet to SDC Power Cable, [8] and recharged with environmentally friendly solar power. MPPT (Maximum Power Point Tracking) is an intelligent algorithm that supports real-time monitoring of the voltage generated by connected solar panels. By tracking and maintaining the highest voltage and current values (V-I), the algorithm allows the solar panels to recharge DJI Power 1000 in an optimized and efficient way. * Solar panels from DJI-certified brand Zignes are recommended. DJI Power 1000 supports a max solar power input of 800 W, and it can be fully recharged by solar power in approx. 1.35 to 2.8 hours. [9] Car Power Easily supercharge any road trip. With the DJI Power Car Power Outlet to SDC Power Cable (12V/24V), you can fully recharge DJI Power 1000 via car charger. Safety Design Safe and Secure, Inside and Out Safety comes first at all times. From the body structure and cell chemistry to the system software, DJI Power 1000 features a comprehensive safety design. It has passed 26 product test certifications from the Swiss third-party testing authority SGS, ensuring worry-free electrical usage. Intelligent Battery Management System (BMS) When the safety threshold of electricity usage is surpassed, the protective mechanism for supplying power and recharging will kick into action automatically. And once electricity supply returns to normal, DJI Power 1000 will resume operation. LFP Cell The LFP cell is safe and durable, and can achieve 4000 cycles, [10] providing a lifespan of approximately 10 years, even with frequent use. [11] SGS Switzerland Authority Certification Thanks to its comprehensive safety design, DJI Power 1000 has gained the high-quality portable power station certification from SGS Switzerland, and received 26 product test certifications, including 2 product test verifications, 4 mechanical performance tests, 9 electrical performance tests, 3 environmental resistance tests, 5 noise-level tests, and 3 intelligent and efficient DC power-supplying and recharging tests. Safe and Reliable Power Usage 11 Temperature Sensors 11 temperature sensors on the device continually monitor heat dissipation, and the power station can function normally even in temperatures as high as 40° C (104° F). [12] Power Outage Protection Ten fuses located throughout the power station provide circuit protection for each module. Even if there is a circuit abnormality, DJI Power 1000 will respond quickly and safely. High-Strength Structure The power station uses flame-retardant material and supports weight up to 100 kg (220 lbs), [12] further enhancing reliable protection. UPS Mode, Seamless Power Continuity If an electrical device is connected to a powered-on DJI Power 1000 (via AC output port) and both are receiving grid power, DJI Power 1000 defaults to UPS (Uninterruptible Power Supply) mode. In cases of sudden power outage, DJI Power 1000 can start powering the connected device (or devices) within 0.02 seconds, [12] ensuring continued operation. Ultra-Quiet Operation The noise level of DJI Power 1000 is as low as 23 dB [13] during recharging, lower than most household refrigerators, so there is no noise disturbance even in quiet environments. Ample Accessories [Extensive Ports, Expanded Applications] Dual USB-C Out Ports (140W Max) DJI Power 1000 has two 140W USB-C output ports, [4] with a total power output of up to 280 W, a 40% increase compared to the commonly found dual 100W USB-C output ports on the market. It easily meets the electricity demands of most USB-C port devices, while supporting up to PD 3.1 140W charging that can fast charge a 16-inch MacBook Pro. Extensive Accessories DJI Power 1000 has dual USB-A ports, dual AC output ports, one SDC port, one SDC Lite port, and two 1/4″ thread holes. It is highly versatile to make power usage in various scenarios more convenient. It can connect to different types of solar panels, power cables, and adapter cables, meeting the needs of a variety of power supply and recharging options. DJI Power Solar Panel Adapter Module (MPPT) Connect to one to three solar panels and recharge DJI Power 1000 with solar power. DJI Power Car Power Outlet to SDC Power Cable (12V/24V) Can connect to one solar panel to recharge DJI Power 1000 via solar power, or recharge DJI Power 1000 via car charger. Zignes 120W Solar Panel (Outside North America) Zignes 100W Solar Panel (North America Only) When paired with the DJI-certified Zignes solar panels, DJI Power 1000 can be recharged via solar power using the DJI Power Solar Panel Adapter Module (MPPT). DJI Power SDC to Matrice 30 Series Fast Charge Cable 230W fast charge, charge a Matrice 30 battery from 10% to 95% in 32 mins. DJI Power SDC to DJI Air 3 Fast Charge Cable 125W fast charge, charge an Air 3 battery from 10% to 95% in 30 mins. DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable 150W fast charge, charge a Mavic 3 series battery from 10% to 95% in 32 mins. DJI Power SDC to DJI Inspire 3 Fast Charge Cable 200W fast charge, charge an Inspire 3 series battery from 10% to 95% in 28 mins. DJI Power SDC to XT60 Power Cable (12 V) With this cable, DJI Power 1000 can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors. DJI Power SDC to Car Charger Plug Power Cable (12 V) Using this cable, DJI Power 1000 can charge car-powered devices that have a car charger plug, such as a car refrigerator. DJI Power 1000 Protective Storage Case Protect the power station from bumps and dust, and make it more convenient to carry. * All of the aforementioned accessories are sold separately. All aforementioned charging data was measured in a controlled test environment and is for reference only. Actual user experience may vary. ** Certain accessories are currently out of stock. Stay tuned to DJI updates on availability. *** Actual appearance of certain accessories may vary. Notes * The appearance of products sold in different countries and regions may vary. Refer to the actual item. Available when the product's battery level is above 20%. Device power does not exceed 2000 W. Data tested under laboratory conditions at 25° C (77° F) and should be used for reference only. Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications. Requires certain accessories, which are sold separately. DJI Power 1000 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after registration. Consult customer service on DJI Store for more details. Supports DJI Mavic 3 Pro Series, Mavic 3 Classic, Mavic 3 Series, and Mavic 3 Enterprise Series. DJI Power 1000 can connect to up to two DJI Power Solar Panel Adapter Modules (MPPT), which can then connect up to three solar panels, meaning up to six solar panels can be connected to DJI Power 1000 at the same time. Additionally, DJI Power 1000 can connect to one solar panel through the DJI Power Car Power Outlet to SDC Power Cable. Requires the DJI Power Solar Panel Adapter Module (MPPT) and solar panels. The aforementioned accessories are sold separately. The minimum time to fully recharge was measured under 25° C (77° F) laboratory conditions and is for reference only. Actual recharging time is subject to factors like the angle of sunlight and light intensity. Actual user experience may vary. To use solar panels not officially recommended by DJI, convert the solar panel connector to an XT60 interface. To prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of each solar panel is less than 30 V. The power output of each solar panel connected to a single XT60 interface should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W. Measured under 25° C (77° F) laboratory conditions, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W. Based on the correct usage of the product, DJI Power 1000 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle on a daily basis. This data is for reference only. Actual user experience may vary. Data measured in a DJI laboratory. Measured 100 cm away from DJI Power 1000 while it was being recharged in the Standard Recharging Mode and is for reference only. During power output, the device being charged must support the PD 3.0 protocol. During power input (recharging the power station), the charger must support the PD 3.0 protocol. DJI Power 1000 Specifications: Model DYM1000L/DYM1000H Capacity 1024 Wh Net Weight Approx. 13 kg Dimensions 448×225×230 mm (L×W×H) Number of Ports "AC Output × 2<br> USB-C × 2<br> USB-A × 2<br> SDC × 1<br> SDC Lite × 1<br> AC Input × 1" Max Operating Altitude 3000 m AC Output "DYM1000L: AC 100-120 V, 50/60 Hz, max continuous output: 2200 W<br> DYM1000H: AC 220-240 V, 50/60 Hz, max continuous output: 2400 W<br><br> <sup>Max continuous output power is available when the product's battery level is above 20%. AC output data varies by country and region. </sup><br> <sup>Given that the voltage in Japan is 100 V, the max continuous output power of the Japanese version is 2000 W.</sup>" AC Output (Bypass Mode) "DYM1000L: AC 100-120 V, 12 A, 1440 W<br> DYM1000H: AC 220-240 V, 10 A, 2200 W" USB-A Output "5 V, 3 A<br> 9 V, 2 A<br> 12 V, 2 A<br> Max output power per channel: 24 W" USB–C Output "5 V, 5 A<br> 9 V, 5 A<br> 12 V, 5 A<br> 15 V, 5 A<br> 20 V, 5 A<br> 28 V, 5 A (EPR)<br> Max output power per channel: 140 W*<br> <sup>* The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.</sup>" SDC and SDC Lite Output "SDC: 9-27 V, max current: 10 A, max output power: 240 W<br> SDC Lite: 9-27 V, max current: 10 A, max output power: 240 W<br><br> <sup>Both of the SDC and SDC Lite ports support extensive accessories.</sup>" AC Input "DYM1000L: AC 100-120 V, 1200 W (recharging), 1440 W (Bypass mode)<br> DYM1000H: AC 220-240 V, 1200 W (recharging), 2200 W (Bypass mode)" SDC and SDC Lite Input "SDC: DC 32-58.4 V, max 400 W, 8 A<br> SDC Lite: DC 32-58.4 V, max 400 W, 8 A<br> <sup>Both of the SDC and SDC Lite ports support extensive accessories.</sup>" Cell Chemistry LFP (lithium ferrophosphate) Cycle Life "Maintains over 70% capacity after 4000 cycles.<br> <sup>Measured at 25℃/77°F room temperature, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W.</sup>" Power Supply Temperature -10° to 45° C (14° to 113° F) Recharging Temperature 0° to 45° C (32° to 113° F) Storage Temperature -10° to 45° C (14° to 113° F) 3 In the Box DJI Power 1000 × 1 DJI Power AC Power Cable × 1
$2,633.00$2,349.00
DJI Zignes 120W Solar Panel
Overview The Zignes solar panel leverages solar energy to eco-recharge the DJI Power-series power stations, with a single panel reaching a max charging output of 120 W. Featuring a foldable design, it is convenient to store and transport, and comes with a stand for easy setup without the need for additional supports. It includes a 3m extension cable, allowing users to freely position it in well-lit areas for flexible placement. Designed with an IP65 rating for dust and water resistance, it accommodates a variety of everyday use scenarios. Tips Zignes 120W Solar Panel requires the use of a DJI Power Solar Panel Adapter Module (MPPT) or a DJI Power Car Power Outlet to SDC Power Cable (12V/24V) for connection to the DJI Power-series power stations. Purchase the accessories as needed. Each DJI Power Solar Panel Adapter Module (MPPT) can then connect to one to three solar panels, while the DJI Power Car Power Outlet to SDC Power Cable (12V/24V) can connect to one solar panel at most. After-sales Service: Return Period: 30 days (from the date of receipt of the package) Exchange Period: 30 days (from the date of receipt of the package) Warranty Period: 2 years (for EU regions); 1 year (for other regions) * After-sales services are provided by DJI. In The Box Zignes 120W Solar Panel × 1 Specifications Rated Power: 120 W Open-circuit Voltage: Max 26 V Short-circuit Current: Max 7 A Weight: Approx. 5.6 kg Unfolded Dimensions: 1365×580×36 mm (L×W×H) Folded Dimensions: 365×580×70 mm (L×W×H) Operating Temperature: -20° to 60° C (-4° to 140° F) Compatibility DJI Power Solar Panel Adapter Module (MPPT) DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
$689.00
DJI Power Solar Panel Adapter Module (MPPT)
Overview When a DJI Power-series power station is connected to the DJI Power Solar Panel Adapter Module (MPPT), users can link solar panels through the XT60 interface on the adapter panel for eco-friendly recharging of the DJI Power series. It is recommended to use the DJI Power-series power stations in conjunction with solar panels from the DJI-certified brand Zignes. If using solar panels from other brands, using the MPPT module and a conversion of the solar panel port to the XT60 interface are necessary to enable solar recharging for the DJI Power series. * Required accessories are sold separately. Tips 1. One MPPT module can connect to up to three solar panels. 2. To use solar panels not officially recommended by DJI, and to prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of the solar panel is less than 30 V. The power output of each solar panel should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W. 3. While using solar panels with the MPPT module, install the included metal heat dissipation bracket. 4. When used with the DJI Power 500, the max output power of the solar panels connected to the entire adapter module should not exceed 300 W. In The Box DJI Power Solar Panel Adapter Module (MPPT) × 1 Metal Heat Dissipation Bracket × 2 Ball-End Hey Key × 1 10mm Screw × 3 20mm Screw × 3 Specifications Total Output: Single Channel: Max 200 W Triple Channels: Max 400 W (with DJI Power 1000) Max 300 W (with DJI Power 500) Input Voltage: 12-30 V, DC Max Input Current: Single Channel: 10 A Triple Channels: 16 A Operating Temperature: -10° to 45° C (41° to 113° F) Compatibility DJI Power 1000 DJI Power 500
$145.00
DJI Power SDC to Matrice 30 Series Fast Charge Cable
Overview Boasts fast-charging power output of 230 W, and can connect the DJI Power-series power station to charge DJI Matrice 30 series batteries. It takes approx. 47 minutes to charge one Matrice 30 Series TB30 Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. In The Box DJI Power SDC to Matrice 30 Series Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Matrice 30 Series
$69.00
DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable
Overview Boasts fast-charging power output of 150 W, and can connect the DJI Power-series power station to charge DJI Mavic 3 series batteries. It takes approx. 58 minutes to charge one DJI Mavic 3 Series Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. *Actual appearance of certain accessories may vary. In The Box DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Mavic 3 Series DJI Mavic 3 Classic DJI Mavic 3 Pro Series DJI Mavic 3 Enterprise Series DJI Mavic 3 Multispectral Edition
$69.00
DJI Power SDC to DJI Air 3 Fast Charge Cable
Overview Boasts fast-charging power output of 125 W, and can connect the DJI Power-series power station to charge DJI Air 3 batteries. It takes approx. 44 minutes to charge one DJI Air 3 Intelligent Flight Battery from 0% to 100% and 30 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. In The Box DJI Power SDC to DJI Air 3 Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Air 3
$69.00
DJI Power SDC to DJI Inspire 3 Fast Charge Cable
Overview Boasts fast-charging power output of 200 W, and can connect the DJI Power-series power station to charge DJI Inspire 3 batteries. It takes approx. 44 minutes to charge one DJI Inspire 3 TB51 Intelligent Battery from 0% to 100% and 28 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. In The Box DJI Power SDC to DJI Inspire 3 Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Inspire 3
$69.00
DJI Power SDC to XT60 Power Cable (12V)
Overview With this cable, DJI Power-series power stations can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors. Tips Actual appearance of certain accessories may vary. In The Box DJI Power SDC to XT60 Power Cable (12V) × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500
$75.00
DJI Power SDC to Car Charger Plug Power Cable (12V)
Overview With this cable, a DJI Power-series power station can convert SDC to a car charger plug, providing a 12V DC output to charge devices with car charger sockets, such as car refrigerators, car vacuum cleaners, and similar accessories. Tips Actual appearance of certain accessories may vary. In The Box DJI Power SDC to Car Charger Plug Power Cable (12V) × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500
$75.00
DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
Overview To connect car power outlet to SDC or SDC Lite port on a DJI Power-series power station for charging the latter after the car starts. The accessory described comes in two parts: one XT60 to SDC Module, and one Car Power Outlet to XT60 Power Cable. The XT60 to SDC Module can also act as a solar panel adapter module (MPPT), suitable for connecting one Zignes 100W/120W Solar Panel. In The Box XT60 to SDC Module × 1 Car Power Outlet to XT60 Power Cable × 1 Specifications Input specification: 12-30 V, DC Max Output Power: 65 W Operating Temperature: -10° to 45° C (14° to 113° F) Compatibility DJI Power 1000 DJI Power 500
$119.00
DJI Power 1000 Protective Storage Bag
Overview Designed for storing DJI Power 1000, it is convenient for single-handed carrying. The back has a dedicated space for cable management, which makes it user-friendly. Additionally, the left and right handles are equipped with venting openings. With the zipper opened, there's no need to remove the DJI Power 1000 from the case to operate it. It also features a flip-up design at the panel location of DJI Power 1000, which covers the power ports to protect against accidental splashes and raindrops. In The Box DJI Power 1000 Protective Storage Bag × 1 Specifications Dimensions: 452×240×232 mm (L×W×H) Compatibility DJI Power 1000
$265.00