Power your X3 action camera with this Rechargeable 1800mAh Battery from Insta360. With a 10% increased capacity for a total of 1800mAh, this battery ensures you can capture all the action for up to 81 minutes. Its lithium-ion chemistry can be recharged in just 90 minutes for continued use. Included with the battery is a box to store it in with built-in memory card storage.
Compatibility
Insta360 X3
PRODUCT SPECIFICATIONS
Battery Chemistry: Lithium-IonBattery Capacity: 1800 mAhOutput Voltage: 3.85 VDCCharging Power: 4.4 VDCRecharge Time: 90 MinutesMaximum Battery Life: 81 MinutesOperating Temperature: -20 to 40°CCharging Temperature: 0 to 40°C
IN THE BOX
Insta360 X3 Battery × 1
The Fast Charging Hub for the Insta360 X3 camera charges up to three X3 batteries simultaneously. Batteries charge in approximately 90 minutes, with an LED above each battery slot confirming whether the battery is charging, charged, or not charging because of malfunction. A USB Type-C charging port provides power to the hub and overcharge protection ensures intelligent charging management.
Compatibility
Insta360 X3 Battery
PRODUCT SPECIFICATIONS
USB Input/Output: 1 x USB Type-C Female InputPower Source: USBDC Input Power: 12 VDC at 3 AOperating Temperature: 0 to 40°CColour: BlackCable Length: Not Specified by ManufacturerDimensions: 71.8 x 60.4 x 31.6 mmWeight: 96 g
IN THE BOX
Insta360 X3 Fast Charge Hub × 1
(batteries sold separately.
This Sticky Lens Guard Set includes two lens covers for both sides of your Insta360 X3 camera to protect it from scratches and dust. The plastic guards help prevent wear and tear from affecting your image quality. Additional dual-sided adhesive allows you to remove and reinstall the guards as needed.
Compatibility
Insta360 X3
PRODUCT SPECIFICATIONS
Material of Construction: PlasticDimensions: 34.8 x 10.95 mmWeight: 1.5 g (Per Guard)
IN THE BOX
Insta360 Sticky Lens Guard Set for X3 × 1Double-Sided Adhesive × 6Triangle Prying Tool × 1Lens Cloth × 1
Charge your X3 camera and record audio with an external microphone using the Insta360 Microphone Adapter. The adapter inserts into your camera with a male USB Type-C connector. A 3.5mm audio port connects your microphone to the camera, and a USB Type-C port allows you to charge the camera while recording audio. Thanks to its slim profile, the mic adapter remains invisible even when shooting 360° shots.
Compatibility
Insta360 X3
PRODUCT SPECIFICATIONS
USB I/O:1 x USB Type-C Female Output1 x USB Type-C Integrated Male InputAudio I/O: 1 x 1/8" / 3.5 mm Mic InputPower Source: CameraColour: BlackDimensions: 30.2 x 26.4 x 14 mmWeight: 5.7 g
IN THE BOX
Insta360 X3 Mic Adapter × 1
The vertical Insta360 Quick Reader for your X3 action camera allows you to record footage onto the module and transfer it to your phone or computer without eating up additional camera battery. By inserting a microSD card into the reader and plugging it into the USB Type-C port of your X3, you can store data directly onto the device while you shoot. To preview and edit the footage while on the go, simply insert the Lightning or USB Type-C connector into a compatible mobile device and open the Insta360 app. Files can also be transferred and accessed through a personal computer.
Compatibility
Insta360 X3Apple iPhone, iPod, or iPad with Lightning connectorAndroid devices
PRODUCT SPECIFICATIONS
USB I/O:1 x USB Type-C Integrated Male Input1 x Lightning Integrated Male Output
Power Source: USBColour: BlackMaterial of Construction: Polycarbonate, SiliconeDimensions: 46.18 x 30.49 x 14.05 mmWeight: 12.3 g
IN THE BOX
Insta360 X3 Quick Reader × 1
This Utility Frame is designed to protect your Insta360 X3 camera while adding more mounting points for accessories to complete your loadout. A hinged design allows you to simply side your camera inside and snap the top closed without requiring tools. You can still access all your camera's ports while inside, and its fold-out 2-prong mount at the bottom even allows you to use the camera's 1/4"-20 integrated screw.
Two cold shoe mounts on either side can accommodate fill lights or shotgun microphones. A detachable 2-prong mount can convert one of those cold shoes and mount the camera on its side for horizontal shooting. Included with the frame is a silicone lens cap, which can protect the dual lenses when the camera is not in use.
Compatibility
Insta360 X3
PRODUCT SPECIFICATIONS
Mounting:2 x 2-Prong Mount2 x Cold Shoe MountColour: BlackDimensions: 131 x 64 x 44.66 mmWeight: 72.5 g
IN THE BOX
Insta360 Utility Frame for X3 × 1Silicone Lens Cover × 12-Prong Mount Adapter × 1Allen Key × 1
Insta360 camera perfect companion, automatically concealed in photos and videos by advanced algorithms. Can be used with Bullet-Time Handle to shoot Bullet-Time.
PRODUCT SPECIFICATIONS
Retracted length: 233mm (9.2in)Extended length: 1141mm (44.9in)Weight: 118g (4.1607)Material: Aluminum alloy
The Extended Edition Selfie Stick allows you to take stunning aerial shots with the flick of your wrist.
Product Description
FEATURES
The New Version of the Extended Edition Selfie Stick allows you to take stunning aerial shots with the flick of your wrist. With a maximum length of 3 meters and a minimum length of 0.36 meters this extended edition would be great for those creative shots you think were not possible.
ALL NEW DESIGN
Easier to carry and store. Shortens to just 36cm. Maximum diameter: 36mm. Minimum diameter: 9mm.
EXTEND TO ANY LENGTH
Comfortable Grip
A rubberized grip keeps your hands comfortable.
Exclusive Design
A stick that matches your cam. Rep Insta360 as you shoot.
Product Specifications
Material: Carbon fibreShortest Length: 36 cmTop screw: 1/4 StandardWeight: 365gColour: BlackMaximum length: 3 mBottom screw: 1/4/ standard screw
The Insta360 All-purpose Tripod is seriously stable with extendable legs to adapt to different terrain. Specifically designed for ONE X, EVO, and ONE.
Product Description
The Insta360 All-purpose Tripod is seriously stable with extendable legs to adapt to different terrain. Specifically designed for ONE X, EVO, and ONE.
Note:
1. Take care when placing the tripod. It's safest to use at the lowest height and on a flat surface to prevent the device on the tripod from tipping over.
2. If the Tripod is used with an extension rod, do not extend over 1.5 meters or exceed the maximum load limit of the extension rod. Please refer to the extension rod's product specifications.
3. Please do no use with the legs partially extended
4. Please remove the camera from the Tripod when changing the position of the Tripod. Strong shaking may cause damage of the screw (especially with an extension rod attached) in the mounting plate and / or the camera.
COMPATIBILITY:
Insta360 ONE XInsta360 ONEInsta360 EVO
1) Designed for: Insta360 ONE X2, ONE R, ONE X or EVO 2) Dual Use: Use as an invisible selfie stick, or fold out the built in tripod to set up and shoot. 3) Invisible Selfie Stick: Auto-removed in 360 shots to give you unobstructed, impossible angles. 4) Adjustable Length: Retracts to a handy 24.5cm (9.64in), extends to the lengthy 109cm (42.9in) 5) Plays nice with your gear: 1/4" Standard screw mounts with ease.
COMPATIBILITY:
Insta360 ONE XInsta360 ONE X2Insta360 ONE R
PRODUCT SPECIFICATIONS
Main Material: Aluminium alloy, PC, ABSColour: BlackTop screw: 1/4 Standard Screw (No screw at the bottom)Weight: 216gRetracted Length: 24.5cmExtended Length: 109cm
FEATURES
Get incredible action shots of all your motorcycle adventures.
Ultra strong u-bolt mechanism.
GO 2 must be assembled with the Action Mount Adapter.
Use only with official Insta360 120cm Invisible Selfie Sticks with the twist to lock mechanism (120cm recommended for a better view).
Invisible Selfie Stick is not included in the Standard bundle.
HOW TO USE:
Notes:
Install the U-Bolt Mount on any round or square-shaped part on the rear of the motorcycle only. It is not recommended to install elsewhere on the motorcycle.
Use the wrench to keep the U-Bolt Mount tight and secure.
Please install according to the diagrams above. Use only with official Insta360 120cm Invisible Selfie Sticks with the twist to lock mechanism (120cm recommended for a better view). Do not use with any third party accessories.
When shooting in 360, make sure the camera is mounted parallel to the selfie stick. This ensures the selfie stick is hidden in your shots
GO 2 must be assembled with the Action Mount Adapter (not included)
IN THE BOX
The 70cm invisible selfie stick is auto-removed in 360 shots to give you unobstructed, impossible angles (Invisible Selfie Stick effect can only be achieved with 360 cameras)
Remote camera control makes shooting third person shots easier.High-performance built-in battery boosts your camera's power.The selfie stick should never come in contact with liquid of any kind. Do not use it in the rain.Includes 1x Power Selfie Stick and 1x Type-C to Type-C Cable
CompatibilityOne RSX3One ROne X2
Notes
1. The selfie stick should never come in contact with liquid of any kind. Do not use it in the rain.2. The two USB-C Ports ( ) on the top have the same function. You only need to connect the camera to one of them, not both.3. This product is designed mainly for hand-held use while walking. Do not use it on vehicles (such as motorcycles, mountain bikes, etc.).4. To ensure best results with the selfie stick, please upgrade your camera to the latest firmware.5. The ideal charging environment is 0°C to 45°C (32°F to 113°F). The ideal storage environment is -20°C to 40°C (-4°F to 104°F). Do not use or store the selfie stick in high temperature environments.6. When not using the selfie stick, please shrink it to the storage length. If it is not used for a long time (e.g. 3 months), the battery may become exhausted. Please charge the selfie stick before turning it on.7. The battery of the selfie stick is not removable.8. The "invisible" effect of the Power Selfie Stick is supported by Insta360 X3/X2 and ONE RS/R 360 Lens.
Film improved diving shots from deep below the surface of the water using this Invisible Dive Case from Insta360. Custom-fit to your X3 camera and designed to compensate for water refractions, the clear case maintains visibility of your touchscreen and controls while ensuring seamless 360° video. It has a waterproof depth rating of IPX8 capable of being submerged up to 50m. A built-in 2-prong mount attaches the case to selfie sticks or mounts of your choice and can be adapted to a 1/4"-20 compatible thread with the included adapter.
Compatibility
Insta360 X3
PRODUCT SPECIFICATIONS
IP Rating: IPX8Material of Construction: PolycarbonateDimensions: 154.6 x 84.2 x 83.6 mmWeight: 134 g
IN THE BOX
Insta360 Invisible Dive Case for X3 × 1Anti-Fog Insert × 10Stability Pad × 4Thumbscrew Wrench × 11/4" Mount Adapter × 11/4" Screw × 1Carry Pouch × 1
Capture epic first person shots completely hands-free.
Adjustable and comfortable non-slip design.
GO 3/GO 3S must be assembled with the Quick Release Mount.
GO 2 must be assembled with the Action Mount Adapter.
IN THE BOX
Insta360 Chest Strap x 1
85CM INVISIBLE SELFIE STICK
Wider angles in your pocket.
NOW YOU SEE IT...
...now you don't! The Invisible Selfie Stick automatically disappears from 360º footage for impossible follow-shots and third-person angles.
WIDER ANGLES.
Extends to 850mm for a wider, more natural angle. Perfect for selfies and high-angle shots.
PORTABLE AND POCKET-SIZED.
Folds down to the size of your hand for easy on-the-go storage, ready to use anytime, anywhere.
GET A GRIP.
Includes a removable Selfie Stick Sleeve for a more comfortable grip, especially when using it for long periods of time.
UPGRADED STRENGTH.
More stable and reliable for high-intensity action.
PRODUCT SPECIFICATIONS
Colour: BlackWeight: 119gExtended length: 85cmRetracted length: 19.4cm
IN THE BOX
Insta360 85cm Invisible Selfie Stick × 1
