Keep your GO 3/GO 3S and its essentials safe and sound in between shoots.Precisely molded for GO 3/GO 3S and in-the-box accessories, plus the Mini 2-in-1 Tripod and Quick Release Mount.Robust, hard-shell case to protect your action cam from bumps and drops.
PRODUCT SPECIFICATIONS
Outer box material:Fabric, ethylene-vinyl acetate and velvet
Inner support material:Jersey fabric and ethylene-vinyl acetate
Weight:260g (9.1oz)
Dimensions:232x157x67mm (9.1x6.2x2.6in)
IN THE BOX
Insta360 GO 3/GO 3S Carry Case × 1
Seamless windproof cotton for quality sound transmission.
High-quality acoustic foam to reduce wind noise and produce more transparent sound.
Specifically designed for GO 3/GO 3S.
Includes 4x Mic Wind Muffs.
How to use:
Remove the film from the Mic Wind Muff. Align and stick it under the camera lens, ensuring it does not cover the microphone hole. Press down gently for a few seconds to ensure it is secure.
To remove the Mic Wind Muff, gently peel it off from the edge of the camera lens. Avoid pulling it from the center.
Notes
Before installing, make sure the camera is clean and dry.
Ensure both the Mic Wind Muff and Custom Skin do not cover the microphone hole.
Before shooting, ensure the Mic Wind Muff is firmly attached. Otherwise, the noise reduction effect may be affected.
Stick the original film back onto the Mic Wind Muff when not in use to maintain the adhesiveness. If it loses adhesiveness, clean it with a damp cloth, dry it, and reuse it.
Use and store the Mic Wind Muffs in a dry environment. Do not use them for water sports or rainy days, as dampness may affect the noise reduction effect.
IN THE BOX
Insta360 GO 3/GO 3S Mic Wind Muff x 4
FEATURES
High-definition and crystal-clear transparency.Strong tempered glass means full protection from bumps and scratches.2.5D rounded edges for a smooth feel.Comes with a Protector Application Kit for easy at home installation.
Installation
Clean the screen: Clean the Action Pod screen using the screen cleaning wipe and screen cloth. Use the dust removal sticker to ensure the screen is clear from dirt.
Apply screen protector: Remove the film from the screen protector. Position the screen protector over the screen. Slowly apply the protector until the screen is covered.
Remove air bubbles: Scrape air bubbles from the middle of the screen outward, then press hard to both sides until air bubbles are completely removed.
Remove the remaining film from the screen protector.
*Notes:
Do not reinstall the same screen protector. Any dust that has collected on the screen protector may cause air bubbles and reduce adhesiveness.
If the screen protector moves during installation, use the film removal stick to remove the screen protector and repeat the steps above. Do not completely remove the installed screen protector.
Quick and easy mounting to start filming in a flash.
DOUBLE-LOCKED.
Strong magnet and clasp system for extra protection. No fear of GO 3 coming loose.
FLEXIBLE SHOOTING.
Switch between a 1/4 screw and 2-prong mount for use with different accessories.
ONE CLICK IS ALL IT TAKES.
Snap in or take out your cam in seconds.
How to Use
Installation
Press the buckles on the two sides of the Quick Release Mount, and attach GO 3 or GO 3 with the Action Pod to the mount. GO 3 should be in the same direction as the camera mark on the Quick Release Mount. Press GO 3 or the Action Pod securely into the Quick Release Mount so the buckles on both sides lock.
The 1/4 screw and 2-prong mount on the bottom of the Quick Release Mount support use with other accessories.
*Notes:
This accessory contains magnets. Keep it away from pacemakers and other devices to avoid interference.
Avoid using the Quick Release Mount in high-intensity action environments (such as high vibrations), or your camera may fall and be damaged.
The back of the camera dissipates heat and will get hot during use. Avoid prolonged direct skin contact.
PRODUCT SPECIFICATIONS
Main body material: Die-cast aluminiumWeight: 27.7g (0.9oz)Size: 67x16.3x13.5mm (2.6x0.6x0.5in)
IN THE BOX
GO 3 Quick Release Mount × 1Mount Extension × 1Screw × 1Anti-slip Rings × 4
Shoot true POV videos hands-free.
New design allows the clip to be used with the Magnet Pendant together.
Adjustable up to 195 degrees, for more angles and possibilities.
Silicone, skin-friendly and easy to use.
IN THE BOX
Insta360 GO 3/GO 3S Easy Clip x 1
Lightweight and easy to use, simply store your GO 3/GO 3S and accessories safely.
Soft internal fabric and layered structure to better protect the camera and separate it from accessories.
IN THE BOX
Insta360 GO 3/GO 3S Carry Bag x 1
Mount anywhere with the reusable sticky base.
New, flexible base can be stuck to flat or slightly curved surfaces.
Universal 1/4'' mounting point for use with other accessories.
Magnetic latch to mount both the camera and the Action Pod.
Adjustable ball joint for flexible shooting and creative angles.
Secure your GO 3S with a set of two protective lens guards.
Screw-on design ensures lens protection that stays in place.
Translucent anti-fog coating.
New curved glass design for better image quality.
IN THE BOX
Insta360 GO 3S Lens Guard x 2
Capture epic first person shots completely hands-free.
Adjustable and comfortable non-slip design.
GO 3/GO 3S must be assembled with the Quick Release Mount.
GO 2 must be assembled with the Action Mount Adapter.
IN THE BOX
Insta360 Chest Strap x 1
Easily create a cinematic atmosphere and motion blur effects.
Includes ND8, ND16, ND32 and ND64 filters for different levels of light reduction.
Get the perfect shot in a variety of lighting conditions.
Get long exposure shots and unique effects such as streaky urban light trails and beautiful star trails.
How to use:
Remove the Lens Guard by turning it counterclockwise.
Select a suitable ND filter.
Attach the ND filter and turn clockwise to secure it.
IN THE BOX
ND8 Filter x 1ND16 Filter x 1ND32 Filter x 1ND64 Filter x 1
