DJI DL/DL-S Lenses are professional prime lenses specially designed for aerial photography. Featured light-weighting carbon fiber casing, those lenses are able to reduce the payload of the gimbal and camera, improving the stability when shooting. With the DJI DL mount (diameter: 58mm), the lenses can be mounted onto Zenmuse X7, providing varying focal lengths. When used with Zenmuse X7, the focal length multiplier is 1.5 when taking stills.
COMPATIBILITY
Zenmuse X7
Zenmuse X9
Product Specifications
Focal Length: 35 mm 35mm Equivalent: 53 mmAperture Range: f2.8 - f16Weight (balancing ring and lens hood included): Approx 179g Filter Diameter: 46 mm
DJI DL/DL-S Lenses are professional prime lenses specially designed for aerial photography. Featured light-weighting carbon fiber casing, those lenses are able to reduce the payload of the gimbal and camera, improving the stability when shooting. With the DJI DL mount (diameter: 58mm), the lenses can be mounted onto Zenmuse X7, providing varying focal lengths. When used with Zenmuse X7, the focal length multiplier is 1.5 when taking stills.
COMPATIBILITY
Zenmuse X7
Zenmuse X9
Product Specifications
Focal Length: 24mm 35mm Equivalent: 36mmAperture Range: f2.8 - f16Weight (balancing ring and lens hood included): Approx 178g Filter Diameter: 46 mm
Most versatile professional 3-axis stabilization system
Monocoque carbon fiber frame design
High torque motors supporting cameras up to 30 lbs
Fine tune balancing for precision control
Self-heating hot-swappable batteries
On-board power for camera and accessories
Integrated camera controls
Built-in GPS & compatible with DJI A3 Flight Controller
Availability: Special Order
Product Description
Product Specifications
PRODUCT SPECIFICATIONS
GENERAL
Operation Modes:Underslung ModeUpright ModeBriefcase ModeHandheld, Car Mount, Aerial & Tripod Mode
Axis Modes:3-axisPan-LockRoll-360 (enabled through firmware update)
BUILT-IN FUNCTIONS
Built-in, independent IMU moduleDJI Advanced 32-Bit ARM ProcessorDJI Specialized Gimbal Drive Motors with EncodersDual Battery SystemBluetooth ModuleD-Bus Receiver Supported2.4 GHz/5.8 GHz ReceiverTemperature SensorsBuilt-in Touch PanelBuilt-in GPSUSB Type-C ConnectionPower and Video Signal through Slip Ring
MECHANICAL AND ELECTRICAL CHARACTERISTICS
Working Current Static current: 300 mA (@22.8 V)Dynamic current: 500 mA (@22.8 V)Locked motor current: Max 15 A (@22.8 V)Run Time: 8 hours2.5 hours (when powering gimbal, camera and accessories at the same time)Operating Temperature: -4°F ~ 122°F (-20°C ~ 50°C)Weight Including handle bar: 14 lb (6.4 kg)Excluding handle bar: 11 lb (5.0 kg)Gimbal Dimensions Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
PERIPHERAL
Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 245 mmMaximum height measured from top of the camera base plate: 165 mmMaximum width: 180 mmAccessory Power Connections: 14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)GCU Input Power Intelligent Battery: 4280 mAh-22.8 VConnections 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-CPC Assistant Software Requirements: Windows 7 or above; Mac OS X 10.11 or aboveMobile Assistant Software Requirements: iOS 9 or above; Android 4.4 or above
WORKING PERFORMANCE
Load Weight: (Reference Value) 30 lbs (13.6 kg)Angular Vibration Range: ± 0.02°Maximum Controlled Rotation Speed Pan axis: 360°/sTilt axis: 360°/sRoll axis: 360°/sMechanical Endpoint Range Pan axis control: 360° continuous rotationTilt axis control: ±135°Roll axis control: ±220°Controlled Rotation Range Pan axis control: 360° continuous rotationTilt axis control: ±135°Roll axis control: ±30°
Warranty
WARRANTY DETAILS
Gimbal Mechanics: 12 MonthsGimbal Motors: 6 MonthsRemote Controller: 12 MonthsSmart Battery: 3 MonthsBattery Charger: 6 MonthsThumb Controller: 12 Months
In The Box
IN THE BOX
Ronin 2 Gimbal x 1Grip x 1 Remote Controller x 1TB50 Intelligent Battery x 2Dual TB50 Battery Mount x 1Battery Charger x 1Quad Charging Hub x 1Battery Charger Power Cable x 1Ronin 2 Power Hub x 1Camera Top Cross Bar x 1Camera Base Plate x 1Accessory Mount x 115mm Rod x 215mm Focus Rod Mount x 1Ronin 2 Universal Mount x 1Top Mounting Block x 1Motion Block x 1Water Tight Protective Case x 1ARRI Alexa Mini Power Cable x 1ARRI Alexa Mini Start/Stop Cable x 1RED Power Cable x 1RED RCP Control Cable x 1Ronin 2 Power Cable x 12-pin Power Cable x 1DC Power Cable x 1Triple P-TAP breakout box x 1SDI IN Cable x 1SDI OUT Cable x 1USB Type-C Data Cable x 1UART to D-BUS Cable x 1Hex Tool x 1
The DJI Battery Station is an all-in-one solution to charge, store, and transport the TB50 Intelligent Battery.
Product Description
This advanced battery management system equips professionals to handle any scenario. The ability to simultaneously charge eight TB50 batteries and store 12 TB50 batteries makes the Battery Station the most comprehensive battery management system on the market. Due to its multiple charging ports, the system can also charge other devices including the Inspire 2 remote controller, WB37 Intelligent Battery 2 and mobile devices.
The station is equipped with a LCD screen, which displays the battery's power level, charging voltage, remaining time, temperature and firmware version, ensuring safe flight before flight begins. A built-in cooling fan helps to dissipate heat while charging, while an overheating detection monitor provides an additional level of safety.
Other intelligent features of the DJI Battery Station include three charging modes: Normal, Quick and Silent, providing ideal power management for every shooting scenario. In Normal Mode, eight TB50 Intelligent Batteries can be charged simultaneously, while in Quick Mode four TB50 Intelligent Batteries with the highest battery level in the same group will be charged to 90% in just 35 minutes. In Silent mode, charging speed is lowered for a quieter process on noise sensitive film sets.
To ensure reliable charging and storing of all your batteries, the Battery Station is made of a plastic that meets USA UL 94 V-O flammability standards, making it safer in extreme environments. The station also offers Discharge mode, which brings batteries to 25% for transportation and 50% for storage.
HIGHLIGHTS
Super large storage space for up to 16 TB50 Intellegent batteries or 12 TB50 Intelligent Batteries, two CrystalSky/Cendence Intelligent Batteries and one CrystalSky/Cendence Battery Charging Hub.Charge up to eight TB50 batteries simultaneously. Multiple ports let you also charge the Inspire 2 remote controller, CrystalSky/Cendence Intelligent Battery, and a mobile device.When charging a TB50 Intelligent Battery, the Battery Station's LCD screen displays its current firmware version.Quick, simple, and intelligent discharging feature improves battery maintenance for storage and travel.A built-in cooling fan ensures every battery stays within a safe range. The Battery Station automatically cancels charging and discharging to avoid any safety hazards when overheating is detected.Wheels and a telescopic handle make the Battery Station convenient for travel.
COMPATIBILITY
Inspire 2 TB50 Intelligent BatteryMatrice 200 series TB50 Intellegent BatteryRonin 2 TB50 Intellegent Battery CrystalSky/Cendence Intelligent BatteryCrystalSky/Cendence Battery Charging HubInspire 2 Remote ControllerRonin 2 Remote ControllerMatrice 200 series Remote ControllerPhantom 4 series Remote ControllerPhantom 3 Advanced & Pro Remote Controller
Mobile devices can be mounted to the Cendence Remote Controller via the Cendence Mobile Device Holder. Devices up to 170mm wide are supported.
Availability: Back Order
Product Description
Mobile devices can be mounted to the Cendence Remote Controller via the Cendence Mobile Device Holder. Devices up to 170mm wide are supported.
COMPATIBILITY
Cendence Remote Controller
Dual remote control support with HDMI output.
Availability: Back Order
Product Description
VIDEO TRANSMISSION SYSTEM
The latest update to DJI Lightbridge technology has an effective transmission distance of up to 4.6mi (7km)* and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera op. Users can also switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability.*Unobstructed, free of interference, FCC compliant.**5.8GHz transmission is not available in some regions due to local regulations.
MASTER AND SLAVE CONTROLLERS
New wireless HD image transmission technology sends video information from the master controller to the slave controller and the two controllers can be up to 100m apart without loss of image quality.
BROADCAST MODE
Broadcasters can broadcast direct from the Inspire 2 using its dedicated 1080i50 and 720p60 transmission signal. Aerial live-streaming direct to TV is as simple as connecting the Inspire 2 remote controller to the satellite truck.
HIGHLIGHTS
Dual remote control support with HDMI output.
COMPATIBILITY
Inspire 2
Product Specifications
PRODUCT SPECIFICATIONS
Operating Frequency: 2.400-2.483 GHz; 5.725-5.825 GHz
Max Transmitting Distance (unobstructed, free of interference):2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC)
EIRP:2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC)5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC)
Battery: 6000mAh 2S LiPoOutput Power: 9W (Without supplying power to smart device)
USB Supply Power:iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max)
Operating Temperature : -4° to 104° F (-20° to 40° C)
Small and light propeller protection for safer flight. Easy to mount and detach.
Product Description
Designed to protect people and objects from spinning propellers, these small and light Propeller Guards mount directly underneath the rotors to ensure flight safety.
Install Propeller Guards onto corresponding frame arms. DO NOT mix them to avoid effecting the Vision System.
HIGHLIGHTS
Small and light propeller protection for safer flightEasy to mount and detach
COMPATIBILITY
Phantom 4 SeriesPhantom 4 Series Quick Release Propellers
Image quality, power and intelligence to meet the needs of professional filmmakers and enterprises around the globe.
Availability: Special Order
Product Description
FLIGHT TIME
MAX SPEED
SENSOR RANGE
CONTROL RANGE
VIDEO RESOLUTION
OBSTACLE SENSING
25-27 min
94km/h
30m
7km
5.2k/4k
1080p
Product Specifications
PRODUCT SPECIFICATIONS
AIRCRAFT
Model: T650Weight: 7.58 lbs (3440 g, including propellers and two batteries, without gimbal and camera)Max Takeoff Weight: 8.82 lbs (4000 g)GPS Hovering Accuracy Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision System enabled)Horizontal: ±4.92 feet (1.5 m) or ±0.98 feet (0.3 m, Downward Vision System enabled)Max Angular Velocity Pitch: 300°/sYaw: 150°/sMax Tilt Angle P-mode: 35° (Forward Vision System enabled: 25°)A-mode: 35°S-mode: 40°Max Ascent Speed P-mode/A-mode: 16.4 ft/s (5 m/s)S-mode: 19.7 ft/s (6 m/s)Max Descent Speed Vertical: 13.1 ft/s (4 m/s)Tilt: 13.1-29.5 ft/s (4-9 m/s)Max Takeoff Sea Level: 1.55 mi (2500 m), 3.1 mi (5000 m) with specially-designed propellerMax Wind Speed Resistance: 10 m/sMax Flight Time: Approx. 27 min (with Zenmuse X4S)Motor Model: DJI 3512Propeller Model: DJI 1550TIndoor Hovering: Enabled by defaultOperating Temperature: -4°F to 104° F (-20°C to 40° C)Diagonal Distance: (propeller excluded) 23.8 inch (605 mm, Landing Mode)Max Speed: 58 mph or 94 kph(Sport mode)
REMOTE CONTROLLER
Model: GL6D10AOperating Frequency: 2.400-2.483 GHz, 5.725-5.850 GHzMax Transmitting Distance: (unobstructed, free of interference)
2.4 GHz:FCC: 4.3 miles (7 km);CE: 2.2 miles (3.5 km);SRRC: 2.5 miles (4 km);MIC: 2.5 miles (4 km);5.8 GHz: FCC: 4.3 miles (7 km);CE: 1.2 miles (2 km);SRRC: 3.1 miles (5 km); MIC: - ;EIRP 2.4 GHz:FCC: 26 dBm; CE: 17 dBm; SRRC: 20 dBm;MIC: 17dBm;5.8 GHz: FCC: 28 dBm;CE:14 dBm;SRRC: 20 dBm;MIC: - ;
Video Output Ports: USB, HDMIPower Supply: Built-in batteryCharging: DJI chargerDual User Capability: Host-and-Slave connectionMobile Device Holder: Tablet or Smart PhoneMax Mobile Device Width: 170 mmOutput Power: 9 W (Without supplying power to smart device)Operating Temperature: -4° to 104° F (-20° to 40° C)Storage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C)More than 3 months: 72° to 82° F (22° to 28° C)Charging Temperature: 32° to 104° F (0° to 40° C)Battery: 6000mAh 2S LiPoUSB Supply Power iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max)
INTELLIGENT FLIGHT BATTERY
Model: TB50Capacity: 4280 mAhVoltage: 22.8 VBattery Type: LiPo 6SEnergy: 97.58 WhNet Weight: 515 gCharging Temperature: 41° to 104° F (5° to 40° C)Operating Temperature: -4° to 104° F (-20° to 40° C)Max Charging Power: 180 WStorage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C)More than 3 months: 72° to 82° F (22° to 28° C)
DOWNWARD VISION SYSTEM
Velocity Range: <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m)Altitude Range: <32.8 feet (10 m)Operating Range: <32.8 feet (10 m)Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)Ultrasonic Sensor Operating Range: 0.33-16.4 feet (10-500 cm)Ultrasonic Sensor Operating Environment: Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance)
UPWARD INFARED SENSOR
Obstacle Sensing Range: 0-16.4 feet (0-5 m)FOV: ±5°Operating Environment: Large-size non-reflective obstacles
GIMBAL
Model: ZENMUSE X4S(optional), ZENMUSE X5S(optional)Angular Vibration Range: ±0.01°Controllable Range Pitch: -130° to+40°Roll: ±20°Pan: ±320°Max Controllable Speed Pitch: 180°/sRoll: 180°/sPan: 270°/sInterface Type: DetachableMechanical Range Pitch: -140° to+50°Roll: -50° to+90°Pan: ±330°
CHARGER
Model: IN2C180Voltage: 26.1 VRated Power: 180 W
CHARGING HUB
Model: IN2CHInput Voltage: 26.1 VInput Current: 6.9 A
FORWARD VISION SYSTEM
Obstacle Sensing Range: 2.3-98.4 feet (0.7-30 m)FOV Horizontal: 60°; Vertical: 54°Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)
APP
Name: DJI GO 4Mobile Device System Requirements: iOS 9.0 or later,Android 4.4.0 or later
Warranty
WARRANTY DETAILS
Gimbal Camera (including X4S, X5S): 12 Months
Whole Units (except for gimbal camera, and battery): 12 Months and Flight Hour less than 200 Hours
Battery: 6 Months and Charge Cycle less than 200 Times
Battery Charger: 9 Months
Battery Charging Hub: 9 Months
Propeller and Propeller Mounting Plates: No Warranty
Remote Controller: 12 Months
CINESSD (480G): 12 Months and the Total Bytes Written (TBW) less than 150TB
CINESSD (240G, 120G): 12 Months and the Total Bytes Written (TBW) less than 75TB
CINESSD Card Reader: 12 Months
In The Box
IN THE BOX
Inspire 2 Aircraft x 1Remote Controller x 1Propellers (Pair) x 4Intelligent Flight Battery x 2Charger x 1Battery Charging Hub x 1Power Cable x 1USB Cable (with Double A Ports) x 1microSD Card (16GB) x 1Vision System Calibration Plate x 1Gimbal Damper x 3Propeller Mounting Plates (Pair) x 1Carrying Case x 1Battery Insulation Sticker x 4
CinemaDNG & Apple ProRes Activation Key x 1
The ultimate go pack for your Mavic 2 Enterprise, enough to fit all plug-ins and accessories in one compact bag. The versatile Mavic 2 Enterprise Shoulder Bag is specially designed for commercial use and essential gear to have.
Product Description
The Mavic 2 Enterprise Fly More Kit includes two self-heating Intelligent Flight Batteries, a Mavic 2 Enterprise Car Charger, a Battery Charging Hub, a Battery to Power Bank Adapter, Low-Noise Propellers, and a Mavic 2 Enterprise Shoulder Bag, providing you with comprehensive support in the field of operation.
Both Self-heating Intelligent Flight Batteries have a capacity of up to 59.29 Wh, and each have a maximum flight time of 29 minutes. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real-time, allowing you to focus less on your power levels and more on having an epic flight.
The Mavic 2 Car Charger allows you to charge batteries while driving, and it has a maximum output power of up to 80W and features low-voltage protection technology that ensures the charge will not prevent your car from starting normally.
The Battery Charging Hub enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first. Thanks to the Battery Charging Hub’s foldable design, it’s easy to take it along wherever you go. You can even enjoy up to four charging ports when you use it with the Car Charger or Battery Charger.
The Battery to Power Bank Adapter turns your Intelligent Flight Batteries into high-capacity power banks. Each Battery to Power Bank Adapter has two USB Type-A ports, offering 10 W dual output, allowing you to fully charge a smartphone using just 20% of one battery.
Two pairs of Low-Noise Propellers come in the kit as well. These next-generation propellers adopt a brand new aerodynamic design, which results in quieter flight, increased efficiency, and extended flight time.
The versatile Mavic 2 Shoulder Bag is specially designed for the Mavic 2. It’s capable of holding one aircraft, one remote controller, four Intelligent Flight Batteries, a smartphone, extra propellers, ND filters, cables, microSD cards, and plenty of other accessories.
In The Box
IN THE BOX
Intelligent Flight Batteries × 2Mavic 2 Car Charger × 1
Battery Charging Hub × 1Battery to Power Bank Adapter × 1
Low-Noise Propellers × 2 PairsMavic 2 Shoulder Bag × 1
