The Propeller Guard uses a smart design for quick assembly and disassembly improving flight safety and protecting people and objects from spinning propellers.
Compatibility
DJI Mavic 3 ProDJI Mavic 3 Pro Cine
Improving flight safety; quick assembly and disassembly.
Product Description
Protecting people and objects from spinning propellers and improving flight safety, the Mavic 3 Propeller Guard features an Ingenious design for quick assembly and disassembly.
Highlights
Improving flight safety; quick assembly and disassembly.
Compatibility
DJI Mavic 3 DJI Mavic 3 Cine
Product Specifications
Weight (one side): 58 gRadius: 157 mmMax Outline Dimension after Mounting: 634×549×108.5 mm
In The Box
Propeller Guard (set) × 1
Fits a DJI Mini 2, Two-Way Charging Hub, remote controller, and other small daily objects or products like DJI Pocket 2, Osmo Pocket and Osmo Action.
Product Description
Fits a DJI Mini 2, Two-Way Charging Hub, remote controller, and other small daily objects or products like DJI Pocket 2, Osmo Pocket and Osmo Action.
Compatibility: DJI Mini 2, Mavic Mini
The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source.
Product Description
The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source and store batteries for convenient carrying.
With the DJI 30W USB-C Charger, three DJI Mini 3 Pro Intelligent Flight Batteries can be fully charged in just three hours, greatly improving the charging efficiency.
Compatibility
DJI Mini 3 Pro
Product Specifications
Model: CHX162-30Recommended Charger: DJI 30W USB-C Charger or other USB Power Delivery chargersInput: 5 V, 3 A/9 V, 3 A/12 V, 3 AOutput (USB): 5 V, 2 AOperating Temperature Range: 5° to 40° C (41° to 104° F) Charging Time: Three Intelligent Flight Batteries can be fully charged in about three hours.
In The Box
Two-way Charging Hub × 1
It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge 2 Intelligent Flight Batteries simultaneously in just 70 minutes. With at least one battery stored, it can serve as a power bank, using the remaining battery power to charge devices such as goggles or smartphones.
TipsThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger of 65 W or more allows for charging two batteries at once while using a charger of less than 65 W can only charge batteries one at a time. Refer to the charging protocols supported by the charger.
CompatibilityDJI Flip
PRODUCT SPECIFICATIONS
Input: 5-15 V, max 4.3 A Output (Charging): 5-15 V, max 3 A Charging Method: Charge 2 batteries simultaneously (with charger of 65 W or more)
IN THE BOX
DJI Flip Parallel Charging Hub × 1
It provides 18-minute flight time [1] to allow the drone to perform at least 20 palm takeoff and landing for excursions in succession. [2] Its lightweight design does not compromise battery life. Carry a few extra batteries to ensure you never miss a moment.
Measured in a controlled environment. Specific test conditions are as follows: flying forward at a constant speed of 2 m/s in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. 2. Measured after DJI Neo is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.
PRODUCT SPECIFICATIONS
Capacity: 1435 mAhWeight: Approx. 45 gNominal Voltage: 7.3 VMax Charging Voltage: 8.6 VBattery Type: Li-ionEnergy: 10.5 WhCharging Temperature: 5° to 40° C
Specially designed for the Mavic 3 Pro Series, the Storage Cover protects the gimbal and camera while storing the propellers, making it easy to access and store the drone.
Compatibility
DJI Mavic 3 ProDJI Mavic 3 Pro Cine
PRODUCT SPECIFICATIONS
Weight: 55.26 g
IN THE BOX
DJI Mavic 3 Pro Storage Cover × 1
FEATURES
Get more of the scene with the Wide-Angle Lens, expanding your field of view from 81.5° to 114° when taking photos and from 75° to 100° when recording videos (16:9).
CompatibilityDJI Mini 4 Pro
It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge three Intelligent Flight Batteries simultaneously in just 60 minutes.With at least one battery stored, it can serve as a power bank, using the remaining battery power to charge devices such as goggles or smartphones.
TipsThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger of more than 45 W allows for charging three batteries at once while using a charger of less than 45 W can only charge two batteries simultaneously. Refer to the charging protocols supported by the charger.
PRODUCT SPECIFICATIONS
Input: 5-20 V, max 3 A Output (Charging): 5 V, 2 A Charging Method: Charge three batteries simultaneously (with charger of more than 45 W)
Easy Installation: No need to screw or unscrew the filters. Just snap them on or off with the magnetic QuickSwap system.
Reflection Reduction: A Circular Polarizing Filter (CPL) enriches your photography by intensifying color saturation, boosting contrast, and effectively eliminating unwanted reflections from glossy surfaces.
Gimbal-Friendly: The filters are designed to be lightweight and compatible with the Osmo Pocket 3 gimbal, ensuring smooth and stable footage.
Durable Coating: The filters are resistant to dust, scratches, oil, and water with a color-neutral coating that preserves the natural colors of your scenes.
Why UV? The sun’s emission of UV rays is significantly bad for your camera lens. Freewell UV filter is designed to absorb almost all ranges of UV rays to give more precise and sharper pictures with less haze. It also functions as a protective layer that shields the lens from dirt, dust, and scratches.
Optical Glass: German-made optical glass provides the best possible optics, surpassing or matching any other brand in the industry with color-neutral scratch-resistant, Waterproof, DustProof, and OilProof coating.
Installation: Remove the stock filter by twisting the counterclockwise before installing a new filter.
Gimbal Safe: Freewell's Gimbal Safe technology is designed to create filters for each drone that guarantee no adverse effects on the gimbal, ensuring maximum safety.
FEATURES
The lightweight 360° Propeller Guard fully surrounds the propellers to avoid injury or damage and improve flight safety. It is especially useful for beginners flying indoors or in places with numerous obstacles.
Tips1. Before installing the propeller guard on DJI Mini 4 Pro, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.2. DJI Mini 4 Pro does not support obstacle avoidance after installing the propeller guard and cannot actively detour or brake when it senses an obstacle. When using intelligent features, the aircraft will not have obstacle avoidance capability.3. The aircraft will weigh more than 250 g after installing the propeller guard. Always carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flying.4. Do not use the Intelligent Flight Battery Plus after installing the propeller guard. Otherwise, the weight will overload the drone’s capacity, and flight safety cannot be guaranteed.
CompatibilityDJI Mini 4 Pro
PRODUCT SPECIFICATIONS
Weight (one side): 42 gRadius: 97 mmDimensions (after installation): 411.6×335×115 mm (L×W×H)
DJI OM Magnetic Phone Clamp 3 attaches to your smartphone quickly and easily for a secure connection with the gimbal. This convenient attachment is thin, lightweight, and reliably secure. It's also carefully designed to avoid covering buttons on your mobile device and works smoothly with large phones.
Tips
DJI OM Magnetic Clamp 3 contains magnets. Please keep it away from magnetic cards, IC cards, pacemakers, hard disks, RAM chips, and other objects that are subject to interference.
Compatibility
Osmo Mobile 6Osmo Mobile SEDJI OM 5DJI OM 4 SEDJI OM 4
Provides 30W quick charging to one DJI Mini 3 Pro Intelligent Flight Battery in just 64 minutes.
30W fast charging, for only 64 mins to charge one DJI Mini 3 Pro Intelligent Flight Battery.
The charger does not include a power cable.
Compatibility
DJI Mini 3 ProDJI Mini 3 Pro Two-Way Charging HubDJI Mini SEDJI Mini 2DJI Mini 2 Two-way Charging HubDJI Charging Display BaseMavic MiniMavic Mini Two-way Charging HubMavic Mini Charging Base
Product Specifications
Input: 100 to 240 V, 0.8 A, 50/60 HzOutput: 5 V, 3 A/9 V, 3 A/12 V, 2.5 A/15 V, 2 A/3.3 to 11 V, 2.72 ADJI Mini 3 Pro Intelligent Flight Battery Charging Time: Approx. 64 mins (subject to temperature)DJI Mini 3 Pro Intelligent Flight Battery Plus Charging Time: Approx. 101 mins (subject to temperature)
In The Box
DJI 30W USB-C Charger (AU) × 1
The remote control hood protects the screen content of the mobile phone from sunlight in strong light conditions and provides a clear picture.
Product Description
The remote control hood protects the screen content of the mobile phone from sunlight in strong light conditions and provides a clear picture.
HIGHLIGHTS
Reduces sunlight interferenceReduces screen glare
COMPATIBILITY
Mavic Air 2
- Mini and Portable. This sun hood is smaller and lighter than other ones, while light blocking effects are better.- With soft silicone paneled corner, the sun hood will not affect your operation or cause any discomfort to your hands.- Full-screen Display. Won't block screen image and affect touchscreen operation.- Disassembly-free Bracket. Without removing the bracket, you can put controller in controller bag, combo bag and waterproof case.
Compatibility
DJI RC
Fully protects the propellers and improves flight safety.
Product Description
The lightweight DJI Mini 2 360° Propeller Guard fully protects the propellers and improves flight safety. It is especially useful for beginners and when flying indoors or in places with many obstacles. With the propeller guard mounted, the maximum flight time is 18 minutes.
Tips:To ensure safety, please avoid any contact between the aircraft and yourself or others when the aircraft is powered on. Do not use the propeller guard in high altitudes (2000 m or higher) or in a windy environment.
PRODUCT SPECIFICATIONS
Weight (one side): 23.5 gRadius: 71 mmInstallation After Mounting: 318×267×66 mm
Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.
Tips
1. Mount the propellers strictly according to the user manual.2. Damaged propellers should be replaced as soon as possible.
Compatibility
DJI Air 3
PRODUCT SPECIFICATIONS
Diameter × Thread Pitch: 8.7×4.7 inches (22.1×12 cm)Weight (single): 6.4 g
IN THE BOX
Low-Noise Propellers (pair) × 1
Longer, quieter flight.
Product Description
The DJI Mavic 3 Low-Noise Propellers have undergone precise dynamic balancing tests to become more durable with less noise during flight, higher aerodynamic efficiency, and lower power consumption. The new safety design also helps reduce damage from accidents.
Highlights
Longer, quieter flight.
Tips
1. Please install the blades strictly according to the instruction.2. Damaged propellers should be replaced as soon as possible.
Compatibility
DJI Mavic 3 DJI Mavic 3 Cine
Product Specifications
Diameter × Thread Pitch: 9.4×5.3 in. (23.9×13.5 cm)Individual Weight: 8.5 g
In The Box
Low-Noise Propellers (pair) × 1
The propellers provide quieter flight and powerful, stable momentum for the aircraft.
Product Description
Specially designed for DJI Mini 2, these compact propellers provide quieter flight and powerful, stable momentum for the aircraft.Follow the instructions and attach propellers to the correct frame arms. When changing propellers, use the propellers in the same package and change the screws in the package as well. Do not mix propellers from different packages.
Product Specifications
Diameter × Pitch: 4.7×2.6 inch (119.38×66.04 mm)
Weight: 0.6 g (each)
In The Box
Propeller (pair) × 2Screw × 12
This portable and easy-to-fold landing pad can protect your drone's gimbal camera during takeoff and landing on harsh surfaces.
Product Description
This portable and easy-to-fold landing pad can protect your drone's gimbal camera during takeoff and landing on harsh surfaces. Pegs are also included, so you can secure the landing pad to the ground in strong winds.
Please Note: Pegs should be used when winds are strong. Maintain a safe distance from nearby obstacles when laying out the landing pad.
HIGHLIGHTS
Portable and easy to use.Protects the gimbal and camera.Pegs are included for securing to the ground.
COMPATIBILITY
Mavic SeriesPhantom Series
PRODUCT SPECIFICATIONS
Diameter: 75 cm Weight: 365 g
Offer efficient and stable propulsion for the aircraft.
Tips
1. The propellers for adjacent motors come in clockwise (CW) and counter-clockwise (CCW) orientations. Propellers marked with orange should be attached to the motors on arms with corresponding orange markings, while those without markings go on the unmarked arms. 2. It is recommended to use the screwdriver provided in the package for installation and removal. Using a screwdriver of the wrong size could result in stripped screws or inability to disassemble. 3. For flight safety, propeller screws should be replaced alongside the propellers.
Compatibility
DJI Avata 2
IN THE BOX
DJI Avata 2 Propellers (Pair) × 2M2×8.7mm Screw × 8
