Intelligent flight battery provides up to approximately 20 minutes of flight time. Built-in intelligent battery management system.
Product Description
The rated capacity for each battery is up to 44.4 Wh, supporting flight for up to approximately 20 minutes. The built-in intelligent battery management system monitors battery status in real time for a more worry-free flight.
Product Specifications
Battery Capacity: 2000 mAhVoltage: 22.2 VMax Charging: Voltage 25.2 VBattery Type: LiPo 6SEnergy: 44.4 Wh@0.5CDischarge Rate: Standard: 10CWeight: 295 gCharging Temperature: 5° to 40° C (41° to 104° F)Max Charging Power: 90 W
In The Box
DJI FPV Intelligent Flight Battery ×1
New Zealand’s DJI Care Refresh Plan provides two replacement units for an additional charge. The plan lasts for one year and covers accidents, such as water damage or collision, letting you enjoy your product with peace of mind.
Product Description
NOTE: ALL REPLACEMENTS WILL TAKE 2 - 3 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED.
Care Refresh for FPV can only be used with DJI FPV drones purchased from Ferntech
FEATURES
Provides two replacement units for an additional charge in one year for accidents, such as water damage or a collision, letting you fly with peace of mind.
For DJI Care Refresh (FPV), the first time replacement fee is NZD $599, the second time replacement fee is NZD $669.
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
1) Brand new and un-activated product
2) Aircraft or gimbal activated within the last 48 hours.
3) Handheld device activated within the last 30 days.
* If your craft has been activated for over 48 hours you can follow this instructional video at the bottom of this page to verify your craft is in good working order and still eligible for DJI Care Refresh.
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation card, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacements will be in new or equivalent to new in performance and reliability.
For DJI Care Refresh (FPV), the first time replacement fee is NZD $599, the second time replacement fee is NZD $669.
THE DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire process when claiming a replacement under DJI Care Refresh.
The first step is to get your damaged item back to us. Please contact our helpful team at support@ferntech.co.nz and they will provide details on how to get your product back to us.
Once an assessment has been completed we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please let us know if you would like to have your product replaced even if a repair is cheaper.
Return shipping fees back to your address are covered by DJI Care Refresh.
*We require your product to complete the Care Refresh process.
DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care for your aircraft which is activated over 48 hours, you can take the DJI Care video verification. To accomplish the video verification, please follow the guide below and visit DJI Care Customer Upload portal.
Download the DJI Care Video Verification Tutorial PDF
When connected to a DJI FPV charger, the DJI FPV Battery Charging Hub can be expanded to charge three additional batteries. It enhances efficiency by charging batteries in sequence.
Product Description
When connected to a DJI FPV charger, the DJI FPV Battery Charging Hub can be expanded to charge three additional batteries. It enhances efficiency by charging batteries in sequence.
Compatibility
DJI FPV Intelligent Flight BatteryDJI FPV AC Power AdapterDJI FPV Car Charger
Product Specifications
Charging Temperature: 5° to 40 °C (41° to 104° F)Input: 25.2 V, 3.57 ACharging Time: About 55 minutes (subject to temperature)
In The Box
DJI FPV Battery Charging Hub x 1
Use the gimbal camera with the DJI FPV Drone for recording video at up to 4K/60fps, RockSteady EIS, and 4x slow motion.
Tips
Please refer to the tutorial on the official website for replacement.
Protects gimbal and camera from collision, dust, and water during transportation.
Highlights
Protects gimbal and camera.
Tips
Remove the gimbal cover before flying to ensure normal gimbal movement.
Easy to install and detach, and available for replacement.
TipsPlease refer to the tutorial on the official website for replacement.
IN THE BOX
DJI FPV Top Shell ×2 (Colors: Eternal Green + Void Grey)
DJI FPV Control Sticks are designed to be detachable. You can rotate and attach them onto the remote controller when in use, and put them in the dedicated groove for storage when the mobile device clamps are unfolded.
CompatibilityDJI FPV Remote Controller 2
XT60 to DC power cable connects the DJI FPV Goggles to the battery.
TipsPlease use batteries that meet voltage requirements.
PRODUCT SPECIFICATIONS
Length: 1.25 m
USB-C to DC power cable connects the DJI FPV Goggles to the battery.
CompatibilityDJI FPV Goggles V2DJI FPV GogglesDJI FPV Goggles Battery
Length: 1.25 m
DJI Care Refresh Plus offers you the chance to renew your Care Refresh by extending its coverage for one more year
Product Description
DJI CARE REFRESH PLUS OFFERS YOU THE CHANCE TO RENEW YOUR CARE REFRESH BY EXTENDING ITS COVERAGE FOR ONE MORE YEAR, PROVIDING ONE MORE OPPORTUNITY TO REPLACE YOUR DAMAGED DJI PRODUCT FOR $599. FURTHERMORE, THE WARRANTY* PERIOD OF YOUR PRODUCT WILL BE EXTENDED BY 12 MONTHS.
Please Note:
1) DJI Care Refresh has already been purchased2) DJI Care Refresh has not yet expired3) There is at least one product replacement left under DJI Care Refresh
If you have a DJI Care Refresh activation card, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water
ONE REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh plus offers you one replacement units within one year and covers accidents such as water damage, crashes and collisions. The replacements will be in new or equivalent to new in performance and reliability.
For DJI Care Refresh Plus (FPV), the replacement fee is NZD $599.
THE DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire process when claiming a replacement under DJI Care Refresh.
The first step is to get your damaged item back to us. Please contact our helpful team at support@ferntech.co.nz and they will provide details on how to get your product back to us.
Once an assessment has been completed we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please let us know if you would like to have your product replaced even if a repair is cheaper.
Return shipping fees back to your address are covered by DJI Care Refresh.
*We require your product to complete the Care Refresh process.
DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
Hall effect joystick with ergonomic design offers high accuracy control and an ultra-low latency of 7ms.
Compatibility
DJI FPV Drone
DJI FPV Goggles V2
DJI Avata
DJI Avata 2
DJI Goggles 2
Unmatched Optics: Each of the Freewell 4K Series optics is handcrafted precisely compatible to be used with DJI FPV Racing Drone
GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test putting no negative effect on your drone gimbal.
Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral coating makes sure you get the best possible image while shooting outdoor.
What is included: Just as the name suggests this filter kit takes care of your need during the standard day from cloudy to normal sunny days consist of ND4, ND8, ND16, ND32
Storage Protection: Each filter kit comes with a robust magnetic filter case.
PowerVision’s PowerEgg X is a multi-function device that can be used as an autonomous personal AI camera, a handheld 3-axis AI camera, or a high-performance drone.
• In the autonomous personal AI camera mode, the AI algorithm and robotics technology capabilities enable the PowerEgg X to perform facial recognition, deep learning, and a tracking field of view up to 170°.
• When switched into the handheld mode, the PowerEgg X captures your life moments using its three-axis mechanical-stability augmentation gimbal and Autonomous Personal AI camera. It has a battery life of 3.5 hours and produces 4K/60fps UHD images.
• The PowerEgg X is also a high-performance drone equipped with a 4K/60fps camera and tri-axial mechanical stability augmentation technologies. It can be used for highly dynamic aerial photography. Besides, PowerVision’s patented SyncVoice technology allows users to narrate in real-time by using their mobile phone’s microphone or a wireless earphone. The narration is then automatically synchronized with pictures, effectively ending silent-aerial photography.
Product Specifications
PowerEgg X in AI Camera Mode
Dimensions
7 x 4 x 4 in
Weight
1.2 lb
Operating Temperature Range
32 F - 104 F
Operating Time
4 hrs
Operating Frequency
FCC/IC: 2412~2462MHzCE: 2412~2472MHzSRRC: 2412~2472MHzMIC: 2412~2472MHz
Transmission Power
CE(EIRP): ≤18.2dBm FCC: ≤21dBm IC: ≤21dBm MIC: ≤10mw/MHzSRRC(EIRP): ≤20dBm
PowerEgg X in Drone Mode
Dimensions
19 x 25 x 5 in
Weight
1.9 lb
Diagonal Distance
16.8 in
Max Ascent Speed
11.2 mph
Max Descent Speed
6.7 mph
Max Speed
40 mph
Max Service Ceiling Above Sea Level
2.5 mi
Max Flight Time
30 mins
Max Flight Distance
3.7 mi
Max Wind Resistance Level
Level 5
Operating Temperature Range
32 F - 104 F
Operating Frequency
FCC/IC: 2412~2462MHzCE: 2412~2472MHzSRRC: 2412~2472MHzMIC: 2412~2472MHz
Transmitter Power
CE(EIRP): ≤17.3dBm FCC: ≤27dBm IC: ≤27dBm MIC: ≤10mw/MHzSRRC(EIRP): ≤20dBm
GNSS
GPS + GLONASS
Gimbal
Mechanical Range
AI-Camera Mode:Vertical: -90° ~ +20°Horizontal: -55° ~﹢55°Drone Mode:Vertical: -90° ~ +20°
Camera
Sensor
1/2.8 inch CMOSEffective Pixels: 12 million
Lens
FOV: 78.4°Focal Length: 27mmAperture: f/1.8Shooting Range: 1 m to ∞
ISO Range
Video: 100 - 3200Photo: 100 - 6400
Shutter Speed
Electronic Shutter: 8–1/8000s
Max Image Size
4000 x 3000
Still Photography Modes
Single shot Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV BiasInterval: 3/5/7/10/15/30/60s
Video Resolution
4K: 3840x2160 24/25/30/48/50/60pFHD: 1920x1080 24/25/30/48/50/60/120pHD: 1280x720 24/25/30/48/50/60/120/240p
Max Video Bitrate
75 Mbps
Supported File Systems
FAT32 (≤32 GB)exFAT (>32 GB)
Photo Format
JPEG / RAW
Video Format
MP4 / MOV (H.265/H.264/MPEG-4 AVC)
Supported SD Card
Micro SDClass 10 or UHS-3 rating requiredMax capacity: 128 GB
Internal Storage
6 GB
Remote Controller
Operating Frequency
FCC/IC: 2412~2462MHzCE: 2412~2472MHzSRRC: 2412~2472MHzMIC: 2412~2472MHz
Max Transmission Distance(Unobstructed, free of interference)
FCC: 3.7 miCE: 1.85 miSRRC: 1.85 mi
Operating Temperature Range
32 - 104 F
Transmission Power
CE(EIRP): ≤18.3dBm FCC: ≤27dBm IC: ≤27dBm MIC: ≤10mw/MHzSRRC(EIRP): ≤20dBm
Battery Capacity
3500 mAh
Operating Current/Voltage
1700 mA @ 3.7 V(USB connected with mobile device)
Supported Mobile Device Size
Max thickness: 0.32 inWidth range: 2.6 - 3.3 in
Supported Port Type
Lightning, Micro USB (Type-B), USB-C
Charger
Input
100 - 240 V, 50/60 Hz
Output
13.3 V / 3.76 AUSB-A: 5 V / 2 A
Rated Power
50 W
Intelligent Battery
Energy
43.32 Wh
Capacity
3800 mAh
Voltage
11.4 V
Max Charging Voltage
13.2 V
Battery Type
LiPo 3S
Weight
0.5 lb
Charging Temperature Range
50 - 113 F
Max Charging Power
50 W
App
Mobile App Name
Vision+ 2
Live View Quality
1080p@30fps
Latency
AI-Camera Mode: 170msDrone Mode: 217ms
Required Operating System
iOS 10.0 or later, Android 5.0 or later
In The Box
PowerEgg X Explorer
PowerEgg X
* 1
Remote Controller
* 1
Wrist Strap
* 1
Full Set of Arms & Propellers
* 1
Spare Pair of Propellers
* 1
Intelligent Battery
* 1
Intelligent Charger
* 1
AC Cable
* 1
Micro USB Cable
* 1
Lightning Cable
* 1
USB-C Cable
* 1
Screws
* 6
Screwdriver
* 1
Block for Groove
* 1
Gimbal Protector
* 1
Storage Pack
* 1
Tripod Converter
* 1
Short Tripod
-
Waterproof Housing
-
Pair of Water-landing Floats
-
Storage Bag of Arms
-
Mini 10p to USB 2.0 A Adaptor
-
PowerVision’s PowerEgg X is a multi-function device that can be used as an autonomous personal AI camera, a handheld 3-axis AI camera, or a high-performance drone.
• In the autonomous personal AI camera mode, the AI algorithm and robotics technology capabilities enable the PowerEgg X to perform facial recognition, deep learning, and a tracking field of view up to 170°.
• When switched into the handheld mode, the PowerEgg X captures your life moments using its three-axis mechanical-stability augmentation gimbal and Autonomous Personal AI camera. It has a battery life of 3.5 hours and produces 4K/60fps UHD images.
• The PowerEgg X is also a high-performance drone equipped with a 4K/60fps camera and tri-axial mechanical stability augmentation technologies. It can be used for highly dynamic aerial photography. Besides, PowerVision’s patented SyncVoice technology allows users to narrate in real-time by using their mobile phone’s microphone or a wireless earphone. The narration is then automatically synchronized with pictures, effectively ending silent-aerial photography.
Product Description
Product Specifications
PowerEgg X in AI Camera Mode
Dimensions
7 x 4 x 4 in
Weight
1.2 lb
Operating Temperature Range
32 F - 104 F
Operating Time
4 hrs
Operating Frequency
FCC/IC: 2412~2462MHzCE: 2412~2472MHzSRRC: 2412~2472MHzMIC: 2412~2472MHz
Transmission Power
CE(EIRP): ≤18.2dBm FCC: ≤21dBm IC: ≤21dBm MIC: ≤10mw/MHzSRRC(EIRP): ≤20dBm
PowerEgg X in Drone Mode
Dimensions
19 x 25 x 5 in
Weight
1.9 lb
Diagonal Distance
16.8 in
Max Ascent Speed
11.2 mph
Max Descent Speed
6.7 mph
Max Speed
40 mph
Max Service Ceiling Above Sea Level
2.5 mi
Max Flight Time
30 mins
Max Flight Distance
3.7 mi
Max Wind Resistance Level
Level 5
Operating Temperature Range
32 F - 104 F
Operating Frequency
FCC/IC: 2412~2462MHzCE: 2412~2472MHzSRRC: 2412~2472MHzMIC: 2412~2472MHz
Transmitter Power
CE(EIRP): ≤17.3dBm FCC: ≤27dBm IC: ≤27dBm MIC: ≤10mw/MHzSRRC(EIRP): ≤20dBm
GNSS
GPS + GLONASS
Gimbal
Mechanical Range
AI-Camera Mode:Vertical: -90° ~ +20°Horizontal: -55° ~﹢55°Drone Mode:Vertical: -90° ~ +20°
Camera
Sensor
1/2.8 inch CMOSEffective Pixels: 12 million
Lens
FOV: 78.4°Focal Length: 27mmAperture: f/1.8Shooting Range: 1 m to ∞
ISO Range
Video: 100 - 3200Photo: 100 - 6400
Shutter Speed
Electronic Shutter: 8–1/8000s
Max Image Size
4000 x 3000
Still Photography Modes
Single shot Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV BiasInterval: 3/5/7/10/15/30/60s
Video Resolution
4K: 3840x2160 24/25/30/48/50/60pFHD: 1920x1080 24/25/30/48/50/60/120pHD: 1280x720 24/25/30/48/50/60/120/240p
Max Video Bitrate
75 Mbps
Supported File Systems
FAT32 (≤32 GB)exFAT (>32 GB)
Photo Format
JPEG / RAW
Video Format
MP4 / MOV (H.265/H.264/MPEG-4 AVC)
Supported SD Card
Micro SDClass 10 or UHS-3 rating requiredMax capacity: 128 GB
Internal Storage
6 GB
Remote Controller
Operating Frequency
FCC/IC: 2412~2462MHzCE: 2412~2472MHzSRRC: 2412~2472MHzMIC: 2412~2472MHz
Max Transmission Distance(Unobstructed, free of interference)
FCC: 3.7 miCE: 1.85 miSRRC: 1.85 mi
Operating Temperature Range
32 - 104 F
Transmission Power
CE(EIRP): ≤18.3dBm FCC: ≤27dBm IC: ≤27dBm MIC: ≤10mw/MHzSRRC(EIRP): ≤20dBm
Battery Capacity
3500 mAh
Operating Current/Voltage
1700 mA @ 3.7 V(USB connected with mobile device)
Supported Mobile Device Size
Max thickness: 0.32 inWidth range: 2.6 - 3.3 in
Supported Port Type
Lightning, Micro USB (Type-B), USB-C
Charger
Input
100 - 240 V, 50/60 Hz
Output
13.3 V / 3.76 AUSB-A: 5 V / 2 A
Rated Power
50 W
Intelligent Battery
Energy
43.32 Wh
Capacity
3800 mAh
Voltage
11.4 V
Max Charging Voltage
13.2 V
Battery Type
LiPo 3S
Weight
0.5 lb
Charging Temperature Range
50 - 113 F
Max Charging Power
50 W
App
Mobile App Name
Vision+ 2
Live View Quality
1080p@30fps
Latency
AI-Camera Mode: 170msDrone Mode: 217ms
Required Operating System
iOS 10.0 or later, Android 5.0 or later
In The Box
PowerEgg X Wizard
PowerEgg X
* 1
Remote Controller
* 1
Wrist Strap
* 1
Full Set of Arms & Propellers
* 1
Spare Pair of Propellers
* 3
Intelligent Battery
* 2
Intelligent Charger
* 1
AC Cable
* 1
Micro USB Cable
* 1
Lightning Cable
* 1
USB-C Cable
* 1
Screws
* 18
Screwdriver
* 1
Block for Groove
* 1
Gimbal Protector
* 1
Storage Pack
* 1
Tripod Converter
* 1
Short Tripod
* 1
Waterproof Housing
* 1
Pair of Water-landing Floats
* 1
Storage Bag of Arms
* 1
Mini 10p to USB 2.0 A Adaptor
* 1
- Imported removable PVC stickers, stick repeatedly without leaving glue.- Printed with outdoor using ink, dirt-proof/ scratch-proof/ sun-proof.- Easy to paste and tear, easy to deal with bubbles with air lot.- Precisely cutting, accurately pasting, no shrink, no edge warp.
Product Description
- Prevent Oxidation & Short-circuit. Prevent the battery contacts from being exposed to moisture and oxidation.- Soft Silicone Material. Prevent scratching and closely fit.- Tear-proof and Durable
Product Description
- Just enjoy realistic color of your goggles with the high definition and high transmittance films.- Sweat-proof & Scratch-proof. Effectively protect your goggles from sweat, dust and scratches.- Smooth Edges & No Burrs.
Product Description
- Using high quality material of heat-resistant and explosion proof, just for protecting your batteries.- Heat Resistance & Radiation Protection & Explosion Proof.- Safe bag only, batteries are not included.
Product Description
2000nit super-bright screen4.5 Ultra-long battery life(5800mAH) * 128GB Internal memory
-20~40C working temperatureCustomized OS System8-core processor(Samsung Exynos 8895 8-core)13KM Image transmission distance
Note: This unit Only works with the Version 2 Autel EVO 2 Units.
Product Description
Product Specifications
In The Box
1x Evo 2 Smart Remote