At a better price than buying separately, DJI Avata Fly More Kit includes two Intelligent Flight Batteries and a Battery Charging Hub, providing sufficient power for your flight.The Intelligent Flight Battery has a rated capacity of 35.71 Wh and a powerful battery life of approximately 18 minutes*. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real-time, allowing you to focus less on power levels and more on flying.The DJI Avata Battery Charging Hub can charge four batteries in sequence, which greatly enhances the charging efficiency.* Tested when hovering in an environment without wind or interference.
Compatibility
DJI Avata
PRODUCT SPECIFICATIONS
DJI Avata Intelligent Flight Battery:Battery Capacity: 2420 mAhNominal Voltage: 14.76 VCharging Voltage Limit: 17 VBattery Type: Li-ionEnergy: 35.71 Wh@0.5CDischarge Rate: 7C (typical)Weight: Approx. 162 gCharging Temperature Range: 5° to 40° C (41° to 104° F)DJI Avata Battery Charging Hub:Operating Temperature Range: 5° to 40° C (41° to 104° F)Recommended Charger: DJI 65W Portable Charger or other USB PD chargersInput: 5-20 V, max 5 AOutput: 17 VCharging Time: Approx. 47 mins (tested using the DJI 65W Portable Charger and subject to temperature)
IN THE BOX
DJI Avata Intelligent Flight Battery × 2DJI Avata Battery Charging Hub × 1
The Intelligent Flight Battery has a rated capacity of 35.71 Wh and a powerful battery life of approximately 18 minutes*. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real-time, allowing you to focus less on power levels and more on flying.* Tested when hovering in an environment without wind or interference.
Compatibility
DJI Avata
PRODUCT SPECIFICATIONS
Battery Capacity: 2420 mAhNominal Voltage: 14.76 VCharging Voltage Limit: 17 VBattery Type: Li-ionEnergy: 35.71 Wh@0.5CDischarge Rate: 7C (typical)Weight: Approx. 162 gCharging Temperature Range: 5° to 40° C (41° to 104° F)
IN THE BOX
DJI Avata Intelligent Flight Battery × 1
Neutral Color Optics: Industry-renowned Freewell optics ensures color neutrality, ensuring your epic content with perfection.
GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test without adverse effects on your drone gimbal.
Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral.
What is included: UV
Storage Protection: Each filter comes with a robust filter case.
Neutral Color Optics: Industry-renowned Freewell optics ensures color neutrality, ensuring your epic content with perfection.
GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test without adverse effects on your drone gimbal.
Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral coating makes sure you get the best possible image while shooting outdoor.
What is included: Polarizer (PL) Filter
Storage Protection: Each filter comes with a robust filter case.
The compact DJI Goggles 2 Battery powers the goggles and comes with battery level indicators. When DJI Goggles 2 is used with DJI Avata, it can display the goggle's power level in real-time. When fully charged, the battery life is approximately 2 hours.
Compatibility
DJI Goggles 2DJI FPV Goggles V2
PRODUCT SPECIFICATIONS
Capacity: 1800 mAh
Voltage: 7-9 V (1.5 A)
Type: Li-ion
Chemical System: LiNiMnCoO2
Energy: 18 Wh
Charging Temperature: 0° to 45° C (32° to 113° F)
Max Charging Power: 12.6 W (5 V/2 A, 9 V/1.4 A)
Operating Time: Approx. 2 hours
IN THE BOX
DJI Goggles 2 Battery × 1
IMMERSIVE MOTION CONTROL
The powerful and intuitive DJI RC Motion 2 provides convenient and responsive control, allowing even beginners to quickly enjoy the fun of motion-based flight control.
With motion sensing technology, you can control the flight direction with just a slight turn of the wrist.In tandem with the joystick, you can easily navigate, maneuver, and explore the sky in a completely unique way.
When used with DJI Avata and DJI Goggles, the aircraft's flight direction will respond to your hand movements, delivering an immersive flight experience as if you were in the pilot seat.
MULTIFUNCTIONAL AND INTUITIVE
DJI RC Motion 2 is comfortable for extended use.
The accelerator, mode button, lock button, and many of DJI RC Motion 2’s other functions are optimized for single-handed use. Just point and fly.
Takeoff, land, accelerate, turn, reverse, strafe right or left, and more. Unfettered flight is just a button press away.
MULTIDIRECTIONAL OPERATION
Altitude and direction control is even smoother with the DJI RC Motion 2's upgraded joystick. Takeoffand land with precise accuracy and richer dynamic movement, and even tackle more complex flight maneuvers such as darting left and right.
The accelerator features a new reverse function that allows you to fly backward in tight situations. Just back up the way you flew in and avoid a tight U-turn.
The FN dial makes adjusting the ISO, shutter, and other camera parameters a breeze. Quickly make adjustments without raising your hand to your goggles.
* Always ensure your flights are conducted safely and in accordance with local laws and regulations.
The TB51 Intelligent Battery is equipped with high-performance, high-energy battery cells to provide robust power, and it uses an advanced battery management system. It also optimizes low-temperature performance of the cell with a built-in auto-heating system (this function can be enabled automatically by the aircraft or manually in the app).
Tips
Recommended to purchase in pairs.
Compatibility
DJI Inspire 3
PRODUCT SPECIFICATIONS
Model: TB51 Intelligent BatteryCapacity: 4280 mAhNominal Voltage: 23.1 VType: Li-ionChemical System: LiCoO2Energy: 98.8 WhWeight: Approx. 470 gOperating Temperature: -20° to 40° C (-4° to 104° F)Charging Temperature: -20° to 40° C (-4° to 104° F)If the temperature of the battery is lower than 10° C (50° F), the battery will trigger an auto-heating function. Charging in a low-temperature environment below 0° C (32° F) may shorten battery life. Max Charging Power: 411 WCharge via Aircraft: Not supported
IN THE BOX
DJI TB51 Intelligent Battery × 1DJI TB51 Intelligent Battery Paired Batteries Sticker × 1
The 7-inch 1,200-nit high-bright monitor provides an extraordinary outdoor monitoring experience. There are several buttons and dials on the front, back, and top of the remote controller for fast operation. Button functions can be customized. When used together, the built-in battery of RC Plus and an external battery provide an operating time of up to six hours. RC Plus also supports battery hot-swapping. DJI Inspire 3 comes with professional accessories such as a strap and waist support for more comfortable and efficient long-duration use.
Tips
* The term HDMI, the HDMI High-Definition Multimedia Interface, the HDMI trade dress, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Compatibility
DJI Inspire 3
PRODUCT SPECIFICATIONS
Model: RM700BResolution: 1920×1200Max Brightness: 1200 cd/m2Operating Time: Built-in Batteries: approx. 3.3 hoursBuilt-in Batteries Plus External Battery: approx. 6 hoursOperating Frequency: 2.4000-2.4835 GHz5.725 GHz-5.850 GHzIn some countries and regions, 5.1GHz and 5.8GHz frequencies are prohibited, or the 5.1GHz frequency is only allowed for indoor use. Please refer to local laws and regulations. Video Output Port: HDMIPower Supply: Built-in batteries or external batteryCoordinated Operation: Supports dual controls and coordination between multiple operatorsPower Consumption: 12.5 WOperating Temperature: -20° to 50 °C (-4° to 122° F)Storage Temperature: -30° to 45° C (-22° to 113° F) (within one month)-30° to 35° C (-22° to 95° F) (one to three months)-30° to 30° C (-22° to 86° F) (three months to one year)Battery: Built-in Battery: 3250mAh-7.2V (a set)External Battery: WB37 Intelligent BatteryWi-Fi Protocol: Wi-Fi 6Wi-Fi Operating Frequency: 2.4000-2.4835 GHz5.150-5.250 GHz5.725-5.850 GHzWi-Fi Transmitter Power (EIRP): 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC)5.1 GHz: <26 dBm (FCC), <23 dBm (CE/SRRC/MIC)5.8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE)Bluetooth Protocol: Bluetooth 5.1Bluetooth Operating Frequency: 2.4000-2.4835 GHzBluetooth Transmitter Power (EIRP): < 10 dBm
IN THE BOX
RC Plus × 1RC Plus Strap × 1RC Plus Waist Support × 1
Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.
Compatibility
DJI Inspire 3
IN THE BOX
DJI Inspire 3 Foldable Quick-Release Propellers (Pair) × 1
- The upgraded version is compatible with AVATA Pro-View Combo/Explorer Combo. Suitable for new/old version goggles and motion controller.- Professional Waterproof Case: the closed case can effectively avoid seepage and leakage when splashing or sprinkling water.- Impact & Temperature Resistance, Corrosion-proof: the case is made of high-strength hard material, which has high compression assistance and large load-bearing ability.- Shock-proof Inner-tray: the high-quality inner tray can steady hold and protect your devices.- Comfortable Soft Handle: The non-slip and wear-resistant handle can relieve hand pressure.Specifications:Name: Sunnylife Safety Carrying CaseModel: AQX-6-UNet weight: 1.47kgGross weight: 1.68kgProduct size: 35.4*29.4*13.7cmPacking size: 37.5*30.5*15cm
NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.
FEATURES
Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.
DJI Care Refresh 1-Year Plan
ReplacementService
Number of Replacements
2
Number of Flyaway Replacements
1
Replacement Fee
$219.00
Flyaway Replacement Fee
$439.00
Extended Warranty Period
Official warranty is provided during the validity period
Support Renewal?
Renew 1-Year Plan up to twice
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
Brand new and un-activated product.
Aircraft or gimbal activated within the last 48 hours.
Handheld device activated within the last 30 days.
*If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh.
Video Verification Guide
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water.
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.
DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows:
Request a Care Refresh replacement via our online Service Request Form
Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us.
Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper.
*We require your product to complete the DJI Care Refresh process.
Please Note:
DJI Care Refresh covers return shipping fees back to your address.
DJI Care Refresh and the corresponding product must be purchased from New Zealand.
DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.
DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED)
Care Refresh offers 1x Flyaway Cover if your DJI Avata 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video.
For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us.
NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.
FEATURES
Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.
DJI Care Refresh 1-Year Plan
ReplacementService
Number of Replacements
2
Number of Flyaway Replacements
1
Replacement Fee
$219.00
Flyaway Replacement Fee
$439.00
Extended Warranty Period
Official warranty is provided during the validity period
Support Renewal?
Renew 1-Year Plan once
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
Brand new and un-activated product.
Aircraft or gimbal activated within the last 48 hours.
Handheld device activated within the last 30 days.
*If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh.
Video Verification Guide
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water.
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.
DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows:
Request a Care Refresh replacement via our online Service Request Form
Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us.
Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper.
*We require your product to complete the DJI Care Refresh process.
Please Note:
DJI Care Refresh covers return shipping fees back to your address.
DJI Care Refresh and the corresponding product must be purchased from New Zealand.
DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.
DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED)
Care Refresh offers 1x Flyaway Cover if your DJI Avata 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video.
For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us.
IMMERSIVE FLIGHT, BROADEN YOUR HORIZONS
Pair it with DJI RC Motion 3 to get a fully immersive motion control experience, or use it with the RC-N2 or RC 2 remote controllers to pilot a 3-axis-gimbal camera drone. All this delivers silky-smooth live feeds so you can fully enjoy the FPV flying experience.
O4 VIDEO TRANSMISSION, COMPATIBLE WITH AIR 3 AND MINI 4 PRO
With Avata 2, O4 video transmission delivers ultra-low latency at 24 ms and a high bitrate of 60Mbps. Also compatible with Air 3 and Mini 4 Pro, the reliable O4 HD transmission offers crystal-clear and fluid first-person views.
REAL VIEW PIP, SAFETY IN SIGHT
Without removing your goggles, you can now conveniently observe your surroundings to get enhanced flight safety.
ALL-AROUND COMFORT AND CONVENIENCE
Dazzling Upgrades: Enjoy a 1080p Micro-OLED screen with a refresh rate of up to 100 Hz*, alongside the TüV Rheinland Low Blue Light Certification. Accommodates diopter adjustments from -6.0 D to +2.0 D for nearsighted and farsighted users. Battery and Headband Integration: The lightweight, comfortable design that integrates the headband liberates you from tangled cables and offers a lengthy 3-hour operating time.** One-Tap Defogging: With defogging enabled, you get a convenient solution for sudden changes in temperature or high-humidity conditions.
MORE FUN WITH WIRELESS STREAMING
Stream your flight in real-time on the DJI Fly app of your smartphone via Wi-Fi connection.*** You can also import panoramic and 3D videos onto an SD card and play them back using Goggles 3 for an immersive experience that seems almost within reach.
Compatibility
DJI Avata 2DJI Mini 4 ProDJI Air 3DJI RC Motion 3DJI FPV Remote Controller 3DJI RC-N2DJI RC 2
* The screen refresh rate changes with the video transmission frame rate. It may switch between 100 Hz and 60 Hz to adapt to the current video transmission frame rate.** The 3-hour max operating time was measured at an ambient temperature of 25° C (77° F), screen brightness at 4, connected to the DJI Avata 2 aircraft, video transmission set to 1080p/100fps, Head Tracking off, Real View off, and the goggles' battery fully charged and not supplying power to external devices such as smartphones.*** Some countries and regions prohibit the use of the 5.1GHz or 5.8GHz frequency band, or both. In some countries and regions, the 5.1GHz frequency is only allowed for indoor use. If the 5.1GHz/5.8GHz frequency bands are not available (such as in Japan), screen sharing to the smartphone via Wi-Fi is not available. To achieve this function, a wired connection is recommended. Before flying, make sure to check and comply with local radio and aviation laws and regulations.
IN THE BOX
DJI Goggles 3 × 1DJI Goggles 3 Foam Padding × 1DJI Goggles 3 Additional Forehead Pad × 1DJI Goggles 3 -2.0D Corrective Lenses (Pair) × 1USB-C OTG Cable × 1
Engineered for DJI O4 video transmission with an integrated antenna design, it is lighter than its predecessor and boasts a longer operating time. The control sticks are extended by 2 mm, catering to single and dual-fingered control.
In addition to Normal and Sport modes, the DJI FPV Remote Controller 3 offers Manual mode, better suited for advanced players to practice and master more sophisticated skills.
Tips
1. For a tailored control stick feel, it is recommended to use the included screwdriver for adjustments. For more details, check the manual or tutorial videos. 2. DJI FPV Remote Controller 3 is compatible with a variety of simulators including Liftoff, Uncrashed, DCL, and The Drone Racing League.
Compatibility
DJI Avata 2 DJI Goggles 3
PRODUCT SPECIFICATIONS
Weight: Approx. 240 gDimensions: 165×119×62 mm (L×W×H)Operating Time: Approx. 10 hoursCharging Time: Approx. 2 hours
IN THE BOX
DJI FPV Remote Controller 3 × 1DJI FPV Remote Controller 3 Control Sticks (Pair) × 1L-shaped Screwdriver × 1
IMMERSIVE MOTION CONTROL
When used with DJI Goggles 3, the drone's motion responds to your wrist movements. Combined with DJI RC Motion 3's robust anti-interference capability, you can achieve precise "point-to-fly" control.
QUICK CONTROL WITH AR CURSOR
When used with DJI Goggles 3, you can use the RC to control an AR cursor and navigate the menu on the goggles' screen. Enabling functions, and adjusting camera settings has never been more intuitive and efficient.
COMPACT AND PORTABLE, FEATURE RICH
Light and portable, DJI RC Motion 3 features a streamlined design for a comfortable grip. A natural layout of various function buttons on its compact body enables you to perform takeoffs, stops, and mode switches with just a 'push' of your finger.
Tips
Using DJI RC Motion 3 alone cannot control the drone. It requires pairing with DJI Goggles 3.
Compatibility
DJI Avata 2 DJI Mini 4 Pro DJI Air 3 DJI Goggles 3
IN THE BOX
DJI RC Motion 3 × 1DJI RC Motion 3 Lanyard × 1
Provides approx. 23-min flight time.* Get ready for immersive flying with a few more batteries to create your FPV footage more freely and confidently.
Compatibility
DJI Avata 2
* Measured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screen during your flight.
PRODUCT SPECIFICATIONS
Capacity: 2150 mAhWeight: Approx. 145 gStandard Voltage: 14.76 VMax Charging Voltage: 17 VBattery Type: Li-ionEnergy: 31.7 Wh@0.5CCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: With Charging Hub (60W max charging power):From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 minDirectly Charging the Drone (30 W max charging power):From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min
Offer efficient and stable propulsion for the aircraft.
Tips
1. The propellers for adjacent motors come in clockwise (CW) and counter-clockwise (CCW) orientations. Propellers marked with orange should be attached to the motors on arms with corresponding orange markings, while those without markings go on the unmarked arms. 2. It is recommended to use the screwdriver provided in the package for installation and removal. Using a screwdriver of the wrong size could result in stripped screws or inability to disassemble. 3. For flight safety, propeller screws should be replaced alongside the propellers.
Compatibility
DJI Avata 2
IN THE BOX
DJI Avata 2 Propellers (Pair) × 2M2×8.7mm Screw × 8
Provides storage, charging, and power accumulation for batteries. Paired with the DJI 65W Portable Charger, it can fully charge an Intelligent Flight Battery in only 45 minutes. It can sequentially charge three batteries at a time, eliminating the hassle of charging batteries one by one. It can also serve as a mobile power bank to charge devices like the DJI Goggles and smartphones.
Compatibility
DJI Avata 2
PRODUCT SPECIFICATIONS
Input: 5-20 V, max 3 AInput (Power Accumulation): Max 65 WOutput (Charging): Max 17 VOutput (USB): 5 V, 2 ACharging Method: Three batteries charged in sequenceRecommended Chargers: DJI 65W Portable Charger, DJI 65W Car Charger, or other USB Power Delivery chargers
The DJI Avata 2 ND Filters Set includes ND8, ND16, and ND32 filers. By selecting the appropriate filter, you gain more freedom in controlling the aperture and shutter speed, capturing stunning shots like motion blur.
Compatibility
DJI Avata 2
IN THE BOX
ND8 Filter × 1ND16 Filter × 1ND32 Filter × 1
Ultimate Image Quality: Capture stunning, crystal-clear footage under bright conditions with Freewell’s ND8, ND16, ND32, and ND64 filters, designed specifically for the Avata 2 drone.
Seamless Compatibility & Easy Use: Perfectly matched to fit the Avata 2, these filters ensure effortless installation and removal, maintaining the drone's sleek design and functionality.
Professional-grade Footage: Achieve cinematic quality in your videos with reduced shutter speeds, minimized glare, and enhanced color accuracy, thanks to high-quality optical glass.
Lightweight Design for Unhindered Flight: Engineered to be lightweight, these ND filters preserve the Avata 2’s balance and aerodynamics, ensuring uninterrupted, agile flights.
Durable and Convenient: Built to last and resist scratches, these filters come with a protective case, making them easy to carry and switch out on any adventure.
Ultimate Lens Protection: Keep your Avata 2 drone's camera lens safe from scratches and dust with Freewell's UV Filter, designed for durability and resilience.
Crystal Clear Footage: Enhance the clarity and quality of your drone videos and photos by filtering out UV haze and atmospheric haze, ensuring vibrant and sharp images.
Seamless Drone Compatibility: Specifically engineered for the Avata 2 drone, this UV filter fits perfectly, ensuring easy installation and removal without affecting flight dynamics.
Premium Optical Quality: Crafted from high-grade optical glass, the Freewell UV Filter guarantees no compromise on image quality, offering superior protection and image enhancement.
Lightweight Design for Unhindered Performance: Designed to be lightweight, this UV filter maintains the Avata 2 drone's balance and performance, ensuring smooth and stable flights.
Enhanced Color and Contrast: Dramatically improve the color saturation and contrast in your Avata 2 drone footage with Freewell’s Polarizing (PL) Filter, perfect for bright outdoor conditions.
Glare Reduction: Effectively minimize reflections and glare from non-metallic surfaces such as water and glass, ensuring clearer and more visually appealing images.
Precision Fit for Avata 2: Designed exclusively for the Avata 2 drone, this PL filter boasts a flawless fit, ensuring quick installation and removal while maintaining the integrity of your footage.
Superior Optical Quality: Constructed with premium optical glass, the Freewell PL Filter delivers unmatched clarity and quality, preserving every detail of your aerial shots.
Lightweight Design, Maximum Performance: Keep your drone’s performance optimal with this lightweight filter, designed to not affect the drone’s flight dynamics or battery life.
Immersive Flight Experience
Ready to Use
1080p Ultra-Wide Screen
DJI O4 Video Transmission
AR Cursor
2.7-Hour Max Operating Time [1]
EMBRACE THE PILOT'S PERSPECTIVE
When paired with DJI Neo/DJI Avata 2 and DJI RC Motion 3, [2] DJI Goggles N3 lets you soar through the skies and enjoy an immersive flight experience, as if you were in the pilot seat. Activate the head tracking function to control Neo/Avata 2 with head or wrist movements, achieving seamless synergy between you and your drone.
Easily unlock the aerial acrobatics of Neo, and let Goggles N3 immerse you in the thrilling experience of 360° front/back flips, left/right rolls, and 180° drifts.
Unlock the Easy ACRO feature - Power Loop with Avata 2 with a single push (no need for advanced Manual mode controls with the DJI FPV Remote Controller series), and experience adrenaline-pumping excitement with DJI Goggles N3.
READY TO USE, STREAMLINED CREATIONROOMY AND EYEWEAR-FRIENDLY DESIGN
The roomy interior comfortably accommodates glasses, without needing diopter adjustments or lens installations. Simply put them on, and you can take off right away.
INTEGRATED DESIGN
The integrated headband and battery design balance the overall weight of the goggles, ensuring no pressure on your face for a comfortable fit.
ONE-TAP DEFOGGING
When fog builds up on the surface of the lenses, the defogging function effectively controls moisture by accelerating the internal fan speed to swiftly circulate air, making it ideal for changing temperatures and high-humidity conditions.
1080P ULTRA-WIDE SCREEN
DJI Goggles N3 has a full 1080p 60Hz LCD screen and an impressive 54° FOV. Enjoy stunning visuals with minimal dizziness as impactful aerial scenes come alive before your eyes.
O4 FHD VIDEO TRANSMISSIONULTRA-LOW LATENCY, STABLE VIDEO TRANSMISSION
The advanced DJI O4 digital video transmission system adopts a 2T4R antenna design, offering exceptional anti-interference performance. Enjoy 1080p/60fps live feeds with a minimum latency of 31 ms [3] and a transmission range of up to 13 km. [4] The goggles automatically select the optimal frequency band between 2.4 GHz and 5.8 GHz [5] based on the environment. This ensures stable transmission so you can experience flying in real-time and get a buttery-smooth live view.
With a max video transmission bitrate of 60 Mbps [6] and SyncSmooth technology, video transmission from the skies to the ground is optimized, providing a smooth live view even when flying at a high speed.
SMOOTH FLIGHT, POWERFUL OPERATING TIMEAR CURSOR
DJI RC Motion 3 [2] can be used as an AR cursor before the aircraft takes off, or when the aircraft is braking or hovering. This allows you to effortlessly activate functions and adjust settings without taking your hands off RC Motion 3.
REAL-TIME LIVE FEED SHARING
Connect DJI Goggles N3 to your smartphone using a USB-C cable, and you can display a secondary live feed through the DJI Fly app. This allows others to check the live view in real-time, making sharing and teaching convenient and efficient.
PANORAMA VIDEO PLAYBACK
Import panoramic videos onto a microSD card, and you can watch them through DJI Goggles N3. Enjoy a cinematic viewing experience in everyday life.
2.7-HOUR OPERATING TIME
A fully charged DJI Goggles N3 can last through the use of up to 13 DJI Neo batteries. [7] With a powerful 2.7-hour operating time, [1] you can unleash your creative passion and potential to the fullest.
DJI GOGGLES SERIES COMPARISON
DJI Goggles N3
DJI Goggles 3
One 1080p Ultra-Wide LCD ScreenFOV: 54°
Dual Micro-OLED ScreensFOV: 44°
Ready to Use With Glasses On
Adjustable Diopters-6.0 D to +2.0 D
-
Real View PiP
USB-C WiredLive Feed Sharing
Wi-Fi Wireless/USB-C WiredLive Feed Sharing
Integrated Battery Design2.7-Hour Max Operating Time [1]
Integrated Battery Design3-Hour Max Operating Time [8]
DJI O4 Video TransmissionMax Transmission Bitrate: 60 Mbps (2) [6]
DJI O4 Video TransmissionMax Transmission Bitrate: 60 Mbps (Avata 2) [9]
Compatible ModelsDJI NeoDJI Avata 2
Compatible ModelsDJI NeoDJI Avata 2DJI Air 3DJI Mini 4 Pro
Notes
The 2.7-hour max operating time was measured at an ambient temperature of 25° C, screen brightness at 6, connected to the DJI Avata 2 aircraft, video transmission set to 1080p/100fps, Head Tracking off, and the goggles' battery fully charged and not supplying power to external devices such as smartphones.2. DJI Neo, DJI Avata 2, and DJI RC Motion 3 are sold separately.3. Measured when paired with DJI Avata 2, using 1080p/100fps video transmission, and in an open outdoor environment without interference. The 58ms minimum latency was measured when paired with DJI Neo, using 1080p/100fps video transmission, and in an open outdoor environment without interference.4. Measured when paired with DJI Avata 2, compliant with FCC standards, in an open outdoor environment without interference, and subject to the aircraft's max flight distance. Under the same test conditions, when paired with DJI Neo, the transmission distance is 10 km (FCC) and 6 km (CE/SRRC/MIC).5. The 5.8 GHz frequency band is currently banned in certain countries/regions. Always check and strictly abide by local laws and regulations before flying.6. Measured when paired with DJI Avata 2 in an open environment without interference. The video transmission bitrate varies by operating environments. Under the same test conditions, the max bitrate is 50 Mbps when paired with DJI Neo.7. Measured with DJI Neo paired with DJI RC Motion 3 during steady flight at constant speed in Normal mode.8. The 3-hour max operating time was measured at an ambient temperature of 25° C, screen brightness at 4, connected to the DJI Avata 2 aircraft, video transmission set to 1080p/100fps, Head Tracking off, Real View off, and the goggles' battery fully charged and not supplying power to external devices such as smartphones.9. Measured when paired with DJI Avata 2 in an open environment without interference. The video transmission bitrate varies by operating environments.
PRODUCT SPECIFICATIONS
GOGGLES
Model: TKGSMWeight: Approx. 536 g (battery and headband included)349 g (battery and headband excluded)Dimensions: With antennas folded: 193×163×103 mm (L×W×H)With antennas unfolded: 206×163×132 mm (L×W×H)Screen Size (single screen): 3.5 inchesResolution (single screen): 1920×1080Refresh Rate: Up to 60 HzInterpupillary Distance Range: No interpupillary distance adjustment required, ready to use immediately.Diopter Adjustment Range: Diopter adjustment not supported, can be used with personal glasses.FOV (single screen): 54°Video Recording Format: MOV (video format: H.264)Supported Video and Audio Playback Formats: MP4, MOV (video coding formats: H.264, H.265; audio formats: AAC, PCM)Panoramic Video: Spherical 2D panoramic videosMax Video Specification: 4K/60fpsReal View Display: Real View not supported.Operating Temperature: -10° to 40° C (14° to 104° F)Power Input: Built-in batterySupported SD Cards: microSD (up to 512 GB)Recommended microSD Cards: Lexar Professional 1066x 64GB U3 A2 V30 microSDXCLexar Professional 1066x 128GB U3 A2 V30 microSDXCLexar Professional 1066x 256GB U3 A2 V30 microSDXCLexar Professional 1066x 512GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 256GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 512GB U3 A2 V30 microSDXC
VIDEO TRANSMISSION
Video Transmission: O4Operating Frequency: 2.400-2.4835 GHz5.150-5.250 GHz5.725-5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 30 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)< 21 dBm (FCC)5.8 GHz:< 33 dBm (FCC)< 30 dBm (SRRC)< 14 dBm (CE)Latency: With DJI Avata 2:1080p/100fps video transmission quality: Minimum 31 msWith DJI Neo:1080p/60fps video transmission quality: Minimum 58 msMeasured in an open, outdoor environment without interference or obstructions. Actual data varies with different drone models.Max Transmission Distance: With DJI Avata 2:13 km (FCC)10 km (CE/SRRC/MIC)With DJI Neo:10 km (FCC)6 km (CE/SRRC/MIC)Measured in an open, outdoor environment without interference or obstructions and represents the farthest communication range under each standard. The actual max transmission distance during flight is limited by the drone's max flight distance. Always pay attention to RTH reminders on the live view during your flight.Max Video Bitrate: With DJI Avata 2: 60 MbpsWith DJI Neo: 50 MbpsMeasured in an open, outdoor environment without interference or obstructions. Actual data varies with the operating environment.
GFSK
Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): < 26 dBm (FCC)< 20 dBm (CE/SRRC/MIC)
BATTERY
Dimensions: 120×71×44 mm (L×W×H)Capacity: 2450 mAhVoltage: 6.33-8.4 VType: Li-ionChemical System: LiNiMnCoO2Energy: 17.28 WhCharging Temperature: 5° to 45° C (41° to 113° F)Max Charging Power: 5 V/3 A (charging when powered off)Runtime: 2.7 hoursThe 2.7-hour max operating time was measured at an ambient temperature of 25° C (77° F), screen brightness at 6, connected to the DJI Avata 2 aircraft, video transmission set to 1080p/100fps, Head Tracking off, and the goggles' battery fully charged and not supplying power to external devices such as smartphones.
IN THE BOX
DJI Goggles N3 × 1DJI Goggles N3 Foam Padding × 1DJI Goggles N3 Top Headband × 1Documents (Quick Start Guide, Safety Guidelines, and DJI Logo Stickers) × 1
